Chicago Electric 66718 operating instructions Electrical safety, Do not abuse the Power Cord

Page 3

2.Electrical safety

a.The Power Plug for this product must match the Outlet. Never modify the Plug in any way. Do not use any adapter plugs with this product. Unmodified plugs and matching outlets will reduce risk of electric shock.

b.Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded.

c.Do not expose the Battery Charger to rain or wet conditions. Water entering this product will increase the risk of electric shock.

d.Do not abuse the Power Cord.

Never use the Cord for carrying, pulling or unplugging the Battery Charger. Keep the Cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

e.When operating the Battery Char- ger outdoors, use an Extension Cord suitable for outdoor use. Use of a Cord suitable for outdoor use reduces the risk of electric shock.

f. If operating the Battery Charger in a damp location is unavoidable, use a Ground Fault Circuit Inter- rupter (GFCI) protected supply.

Use of a GFCI reduces the risk of electric shock.

3.Personal safety

a.Stay alert, watch what you are do- ing and use common sense when operating the Battery Charger. Do not use this product while you are tired or under the influence of drugs, alcohol or medication. A

moment of inattention while operat- ing power tools may result in serious personal injury.

b.Use personal protective equip- ment. Always wear ANSI-approved eye protection. Safety equipment such as NIOSH-approved dust mask/ respirator, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c. Do not overreach. Keep proper footing and balance at all times. This enables better control of the Battery Charger in unexpected situa- tions.

d.Only use safety equipment that has been approved by an appropri- ate standards agency. Unapproved safety equipment may not provide adequate protection. Eye protection must be ANSI-approved and breath- ing protection must be NIOSH-ap- proved for the specific hazards in the work area.

4.Battery Charger use and care

a.Do not force the Battery Charger.

Use the correct product for your application. The correct Battery Charger will do the job better and safer at the rate for which it was de- signed.

b.Disconnect the AC/DC Adapter’s

Power Plug from the power source before making any adjustments, changing accessories, or storing the Charger. Such preventive safety measures reduce the risk of turning on the AC/DC Adapter accidentally.

c. Store the Battery Charger out of the reach of children and do not allow persons unfamiliar with this

SKU 66718

For technical questions, please call 1-800-444-3353.

Page 3

Image 3 Contents
Distributed exclusively by Harbor Freight Tools For technical questions or replacement parts, please callFor technical questions, please call General Safety WarningsDo not operate Universal Battery Save This ManualElectrical safety Do not abuse the Power CordDisconnect the AC/DC Adapter’s Specific Safety Warnings Maintain the Battery ChargerService Grounding Do not dispose of batteries by fireThis product is not a toy. Keep it out of reach of children Double Insulated Tools Tools With Two Prong Plugs Extension CordsSee Table a SymbologySpecifications UnpackingProduct Features See Figure aRed Charging and Green Fully Charged L.E.D.’s The Red Operating Instructions See Figure BSee Figure C, next See Figure D Maintenance ServicingSKU For technical questions, please call Problem Possible Causes Likely Solutions TroubleshootingDescription Qty Parts List & Assembly DiagramLimited 90 DAY Warranty Please Read the Following CarefullyRecord Product’s Serial Number Here
Related manuals
Manual 14 pages 61.88 Kb