Engine Start, Troubleshooting | Chicago Electric 46944 specification

Operation (continued)

require 1 to 1-1/2 hours of charging at the 40 amp rate to reach the full charge state. For the same battery with its timer set to maximum, 3 hours overcharging will occur. Slight overcharging will not likely harm a battery that was otherwise in good condition. When the state of charge is unknown, start out with a timer setting of one hour or less.

Hold: This position defeats the timer function, allowing for continuous operation. Use it when you want to charge more than 3 hours. This is normally used when the 2 amp charge rate is selected. Be sure to monitor the charging and stop the charge when the battery is fully charged.

Rotary Switch: Use the rotary switch to select the charge rate or engine start setting your require. Read the switch dial for the appropriate setting.

Ammeter: The ammeter indicates the amount of current measured in amperes that’s drawn from the battery. For example, in the 40 amp charge rate a typical discharged battery will ini- tially draw approximately 40 amps. As the battery continues to charge, current will taper to 15 to 20 amps at full charge. When cranking an engine, the starter motor draws upward to 200 amps. The meter needle will be at the extreme right side. The 2 amp charge rate may indicate some activity on the meter. The meter doesn’t have the resolution to display this low rate.

Engine Start

1.Set the charge rate and timer to the off positions.

2.With the Charger unplugged from the AC outlet, connect the Charger to the battery.

3.Plug the Charger AC power cord into the AC outlet, then move OFF to HOLD position.

4.Set the charge rate to the engine start position that matches the vehicle battery, and then crank the engine. Follow the duty cycle printed on the front panel of your charger for proper ON/OFF times. During extremely cold weather, or when the battery is severely exhausted, charge the battery for about five minutes before attempting to crank the en- gine.

5.If the engine fails to start, charge the battery for five more minutes before cranking the engine.

6.After the engine starts, move the charge rate switch to OFF and unplug the AC power cord from the outlet before disconnecting the DC cable clamps.

Troubleshooting

Symptom: Ammeter display reads maximum.

Probable Cause: Defective battery.

Remedy: Check or replace battery.

Symptom: No ammeter reading.

Probable Cause: 1. No power to charge. 2. Battery cables not making connection.

3. Two amp charge rate being used.

Remedy: 1. Check power and cable outlet connections. 2. Clean battery cables and reset cable clamps. 3. None, meter will not indicate here.

Symptom: Charging current not to full output.

Probable Cause: 1. Battery is partially charged. 2. Defective battery, will not hold full charge.

Remedy: 1. Continue charging. 2. Check and/or replace battery.

SKU 46944

Page 7

REV 04/02

46944 specifications

Chicago Electric 46944 is a powerful tool that has garnered attention for its versatile performance and robust features, making it a popular choice among DIY enthusiasts and professionals alike. This electric wood planer is designed to deliver precision and efficiency, ensuring that users can achieve a smooth finish on various woodworking projects.

One of the standout characteristics of the Chicago Electric 46944 is its potent 7.5-amp motor, which provides ample power to handle deep cuts and manage even the toughest hardwoods. The motor ensures a consistent performance, allowing users to tackle a wide range of materials without worrying about the tool bogging down. This level of power is particularly advantageous for those working on larger projects, where efficiency is crucial.

The planer features a cutting depth adjustment knob that allows users to easily modify the depth of cut from 0 to 1/16 inch. This adjustable depth is ideal for achieving the perfect finish, whether it’s for fine woodworking or for more substantial work where a thicker cut is necessary. The ability to precisely control the depth of cut enhances the overall user experience, providing versatility in various applications.

Equipped with double-sided blades, the Chicago Electric 46944 enhances its performance and longevity. These blades can be reversed, effectively doubling their lifespan and ensuring that users get the most out of their investment. The tool's design also includes an integrated kickstand, which allows for safe blade changes and prevents the blades from touching surfaces while adjusting, further enhancing safety during use.

Another notable feature of this electric planer is its ergonomic design. The soft-grip handle provides comfort during prolonged use, reducing user fatigue and promoting better control. The balanced weight distribution of the tool adds to this comfort, enabling more extended periods of operation without compromising precision.

Additionally, the integrated dust port is a significant advantage, facilitating improved visibility for users by effectively managing debris. This feature also makes the cleaning process more manageable, helping maintain a tidy workspace.

In conclusion, the Chicago Electric 46944 is a well-designed electric wood planer that combines power, precision, and user-friendly features. Its robust motor, adjustable depth control, double-sided blades, and ergonomic design cater to the needs of various users, from hobbyists to seasoned professionals. With its practical characteristics, this tool stands out in the crowded market of woodworking instruments, making it a reliable choice for anyone seeking to achieve high-quality results in their projects.