TROUBLESHOOTING
1.Problem: The Battery Charger is plugged into an electrical outlet, but no lights on the Main Unit (1) are illuminated.
2.Possible Solutions:
A.Check to make sure the Power Cord (2) is properly plugged into a working 120 volt, grounded electrical outlet.
B.Check to make sure the connections to the vehicle’s battery posts are secure.
C.Open the Fuse Holder (6) to inspect the 3 AMP Fuse (7). If necessary, replace the Fuse.
PARTS LIST & ASSEMBLY DIAGRAM
Part | Description | Qty. | Part | Description | Qty. |
1 | Main Unit | 1 | 5 | Connection Cord Cap | 1 |
2 | Power Cord | 1 | 6 | Fuse Holder | 1 |
3 | Output Cord | 1 | 7 | 3 Amp Fuse | 1 |
4 | Permanent Connection | 1 | 8 | Temporary Connection | 1 |
| Cord |
|
| Cord |
|
To Charge A Battery Using The Battery Clamps
8
1
3
2
7
(Not Shown)
To Charge A Battery Using The Screw Connectors
4
6 |
|
|
|
|
|
5 |
| 1 |
|
| |
| 3 | 2 | |||
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE: NO REPLACEMENT PARTS ARE AVAILABLE FOR THIS PRODUCT.
SKU 94533 | For technical questions, please call | PAGE |