| P12 |
BATTERY CHARGER REMOTE | |
Instructions | product |
| Scan for |
additional
PN 7520 / PN 1521 | information |
|
Indicates battery charger stage, alerts, and controls basic battery charger functions
LED Indicators
•Charging: Quick check for green light confirms charging
•Charge Stage: Displays charging stage including PreFloat for each battery
•Equalize: Indicates when the charger is in equalization mode
•Fan Mode: Indicates charger’s internal fan mode
•Charge Output: Displays the percentage of output current for each battery. Will also indicate maximum output setting when maximum output is adjusted to accommodate for AC source limitations.
•Alert: Provides warning and alert status for quick diagnostics
Four Control Buttons
•Fan: User adjustable settings (OFF, LOW, or HIGH)
•Dim/ Alarm: Provides adjustment to brightness of LEDs on display as well as Silence function for alarms.
•Output: User adjustable charger output when AC source limitations exist that require lowering the AC current draw.
•Standby: Places P12 Battery Charger into standby mode
GUARANTEE: Blue Sea Systems stands behind its products for as long as you own them. Find detailed information at www.bluesea.com/about. For customer service, call
Blue Sea Systems Inc. | p 360.738.8230 |
425 Sequoia Drive | f 360.734.4195 |
Bellingham, WA 98226 USA | conductor@bluesea.com |
| www.bluesea.com |
| 980016790 Rev.001 |
Specifications
Minimum Operating Temperature | −20°C (−4°F) | |
Maximum Operating Temperature | 60°C (140°F) | |
Minimum Storage Temperature | −30°C (−22°F) | |
Maximum Storage Temperature | 70°C (158°F) | |
Electrical Specification: |
| |
On State Operating Current | <300mA sourced from charger | |
Communications: |
| |
Protocol |
| Proprietary |
Maximum Cable Length | 150 ft (45.7 m) | |
Cable |
| Cat5e (Standard US) |
Mounting Hole Cutout | ||
Dimensions | Height: | 3.01" (76.56 mm) |
| Width: | 4.15" (105.46 mm) |
| Depth: | .95" (24.01 mm) |
Mounting Hardware Included | #6 Screws | |
Regulatory
Surface Mount Gasket creates an IP67 waterproof seal on unit
Warranty
Register your P12 Remote Display at bluesea.com/warranty
Blue Sea Systems stands behind its products for as long as you own them. Blue Sea Systems will replace or issue a credit for any of its products found to be defective in materials or manufacture. P12 Battery Chargers and P12 Remote Displays are warranted for a period of five years from the date of first purchase. No compensation will be allowed for products not returned to Blue Sea Systems for analysis, nor will compensation be made for labor required to replace any defective product. Please contact Customer Service for an RMA number prior to shipping any product back to Blue Sea Systems. Blue Sea Systems cannot accept liability for damage due to the use of the P12 Battery Charger.
“Date of first purchase” means:
1.The date on which the product was purchased by the first retail customer
2.The date on which the first retail customer purchases a vessel on which the product was installed
Blue Sea Systems will (at its sole discretion) repair or replace any product which is:
1.Proven to be defective in materials or workmanship
2.Returned to Blue Sea Systems (or its agent) during the warranty period in accordance with this warranty
The replacement battery charger may be new or refurbished in
Included Components
1.Mounting Screws: (4) #6 x 1"
2.Cover
3.Remote Assembly
4.Mounting Gasket
5.25 ft (7.6 m) Cat5e Cable
6.Dielectric Grease: Blue Sea Systems recommends using a high quality dielectric grease for remote control connection. View the MSDS for the Dielectric Grease at bluesea.com/P12
1
4
3
2
6
5 | 1 of 4 |