Locate the condensate drain, Final Preparation

STEP 9 – Locate the condensate drain.

The connecting line has a built in condensate line hose that removes the moisture collected from the indoor module. The hose must be located in an appropriate location for drainage. Because the hose relies on gravity to drain, it is important that the hose only points downward for the entire length of the hose.

If the connecting line is rolled to store the excess line as shown in Step 6, the drain line may be removed from the connecting line as shown below and cut to an appropriate length.

STEP 10 – Final Preparation.

Using the supplied connecting line clips (Item #14 in the Accessories List), secure the connecting line to the interior and exterior walls as desired. 5 retaining clips are provided from the factory along with standard #8 x 1 1/2” screws and wall anchors.

For installations with the connecting line going through the wall (option 1) use the supplied filler gasket (Item #7 in the Accessories List) to plug the hole around the connecting line in the wall opening. Additional sealing may be desired or necessary for proper weatherproofing.

Once the connecting line is secure and Steps 1-9 are complete, you may plug in the Breeze system and enjoy your new air conditioner.

Routine Maintenance

Cleaning the unit:

The outer cover of the Breeze indoor module can be cleaned with a damp cloth.

Cleaning the outdoor module can be done by rinsing the module with low pressure water. Refer to friedrich.com for approved coil cleaning agents.

Cleaning the filter:

The indoor module of the Breeze system has a washable filter that should be inspected and cleaned periodically. To access and clean the filter follow these steps.

1.Open the front panel by pulling on the left and right side tabs. The front panel will open upward and lock into the open position.

2.Remove the left and right air filters from the Breeze module.

3.Wash the filters by rinsing with water or by vacuuming the dirt from the filter. Allow the filter to dry completely prior to reinstalling.

4.Reinsert both air filters. Then, lower the front panel and snap the panel into place.

SCORE AND PEEL

STEP 9

Peel away

Breeze, BR1224W3A specifications

The Friedrich BR1224W3A is a highly efficient and advanced window air conditioning unit designed to provide optimal cooling and comfort in various environments. Offering a blend of cutting-edge technology and user-friendly features, this model stands out in today’s market for its capability to deliver powerful cooling while maintaining energy efficiency.

One of the primary features of the Friedrich BR1224W3A is its impressive cooling capacity. With a BTU rating of 12,000, it is well-suited for cooling spaces up to 550 square feet, making it ideal for medium-sized rooms such as bedrooms, living areas, or small offices. The unit is designed to cool quickly and efficiently, ensuring that users can enjoy a comfortable environment even during the hottest summer months.

This model incorporates advanced inverter technology, which allows it to adjust its cooling output according to the room’s temperature. This variable speed operation not only enhances comfort by providing a more consistent temperature but also helps to reduce energy consumption by minimizing the on-and-off cycle. As a result, the Friedrich BR1224W3A is ENERGY STAR certified, making it a sustainable choice for environmentally-conscious consumers.

Another notable feature is the unit's quiet operation. It is engineered with a sound-dampening design that minimizes noise, making it perfect for nighttime use or in quiet settings. With a low decibel level, users can enjoy a peaceful environment without the disruptive sounds often associated with standard window air conditioners.

The BR1224W3A also comes equipped with a programmable timer and multiple cooling modes, allowing users to tailor the cooling experience to their specific needs. The unit features an intuitive remote control, making it easy to adjust settings from across the room. Additionally, it includes a washable and reusable filter that helps maintain clean air quality while also reducing maintenance costs.

In terms of installation, the Friedrich BR1224W3A is designed for easy setup in standard window openings. Its compact design ensures a secure fit, while the side panels can be expanded to close gaps and improve energy efficiency. Overall, the Friedrich BR1224W3A combines exceptional performance, innovative technology, and user-friendly features, making it a top choice for those seeking reliable and efficient cooling solutions.