Panasonic SCPM19 Radio preset tuning, Listening operations, Automatic presetting

Listening operations

10

RQT7369

A

BPROGRAM

2 3

1

1 4/REW 3/FF

2 PROGRAM

C3

1

CD

2

1 or PLAY MODE 4/REW 3/FF

2 VOL VOL

The radio: preset tuning

There are two methods of pre-setting stations:

Automatic presetting: Stations the tuner can receive are preset automatically.

Manual presetting: You can select the stations to preset and the order they are preset in.

Up to 15 stations can be preset for FM and AM bands. Press [TUNER/BAND] to select “FM” or “AM”.

A Automatic presetting

Auto presetting for AM and FM each.

1 Tune to the frequency where presetting is to begin (\page 9).

2 Press and hold [PROGRAM].

Auto presetting starts and the last station memorized is tuned in.

B Manual presetting

Preset the stations one at a time.

1 Press [4/REW/4] or [3/FF/¢] to tune to the required station.

2 Press [PROGRAM].

3 Press numeric buttons to select a channel.

The station occupying a channel is erased if another station is preset in that channel.

CSelecting channels

1Press numeric buttons to select the channel.

For channels 10 to 15 press [h10], then the two digits.

1OR

2Press [PLAY MODE] to select “PRESET”.

Press [4/REW/4] or [3/FF/¢] to select the channel.

2 Adjust the volume.

AM allocation setting

By main unit only

Each country allocates broadcast bands according to their particular needs.

This system can also receive AM broadcasts allocated in 10 kHz steps.

To change the step (9kHz ↔ 10kHz)

1Preparation:

2Press [TUNER/BAND] to select “FM”. Press and hold [TUNER/BAND].

After a few seconds the display changes to a flashing display

3of the current minimum frequency. Continue to hold [TUNER/BAND] down.

When the minimum frequency changes, release the button. To return to the original step, repeat the above steps.

Note

After changing the “allocation” setting, the frequencies you previously preset in the memory will be cleared.