AMX Mio-RCC specifications Specifications

Installation Guide

Mio-RCCRechargeable Upgrade Kit and Charging Base

Mio Remote Charging Base

The Mio series of remotes are complemented either with a Mio-RCC charging base (FG147-02)or the Mio-RCC rechargeable upgrade kit (FG147-03K). One charging base, a new back housing and a Mio-RBP rechargeable lithium ion battery (FG147-10) are included with the rechargeable upgrade kit. The charging base upgrade kit transforms the Mio R-1 and Mio R-2 into a rechargeable device.

FIG. 1 Mio Remote Charging Base

Specifications

The specifications for the Mio remote charging base and kit are as follows:

Mio-RCC Remote Charging Kit (FG147-03K) with Base (FG147-02) Specifications

Dimensions (HWD)	Charging Base - 1.61 (4.09 cm) (height); 4.25 (10.80 cm)
	(diameter)
	Lithium Ion Battery - 2.13” x 1.38” x .28”
	(5.41 cm x 3.45 cm x .71 cm)
Weight	• 1.15 lbs (.52 kg) - Remote Charging Cradle
	• .15 lbs (.07 kg) - Power Supply
	• .06 lbs (.027 kg) - Rechargeable Lithium Battery
Included	• Rechargeable Lithium Ion battery (4 hours battery life) Kit
Accessories:	only
	• Back housing Kit only
	• Mio-RCC Charging base (FG147-02) with Power Supply
	• Power supply Kit only
Other AMX	• Mio-RCC Charging Base (FG147-02) with Power Supply
Equipment:	• Mio R-1 (FG147)
	• Mio R-2 RF 418 (FG147-418)
	• Mio R-2 RF 433 (FG147-433)
	• Mio R-3 (FG148-03)
	• Mio R-4 (FG148-04)
	• Mio-RBP Rechargeable Lithium Ion Battery (FG147-10)
	• AXR-RF 418 MHZ RF Receiver (FG782-418)
	• AXR-RF 433 MHZ RF Receiver (FG782-433)
	• Mio Modero IR Receiver (FG5797-01xx; xx indicates color)

Begin with Installing The Rechargeable Battery on the Mio R-1 and R-2for the Mio-RCC rechargeable upgrade kit (FG147-03K) or Charging The Mio Remote with the Charging Base for the Mio-RCC charging base (FG147-02).

Consult the operation/reference manuals for the Mio R-1, Mio R-2, Mio R-3, or Mio R-4 remotes for more information. These manuals are available at www.amx.com.

Rubber feet

(Bottom View)

Angle barrel power connector

Charging contacts

Installing The Rechargeable Battery on the Mio R-1 and R-2

1.Flip and turn the device so that the buttons are facing away from you and the device is upside down.

2.Holding the device in both hands, place your thumbs on the battery door and push up to slide the battery door free.

3.If present, remove the AAA batteries.

4.Remove the 6 screws shown in FIG. 3.

6 Screw Points

FIG. 3 6 Screw Points of the Back Housing for the Mio R-1/R-2

5.Remove the back housing.

6.Place the new housing on the device so that the rechargeable battery port connection is now accessible (FIG. 4).

7.Replace the 6 screws.

8.Connect the terminal end of the Lithium Ion battery to the port shown in FIG. 4. It may be necessary to use a thin, blunt object to fully seat the battery connector within its port.

(Top View)

FIG. 2 Mio Remote Charging Base (Top and Bottom view)