C
D
Solar panel surface facing the sun
E
F
UNDERSTANDING THE POWERSYNC POWER GAUGE
The 4 LED charge indicators on the INPUT end of the battery cylinder (F) allow you to monitor the status of the SolarBook’s internal battery. While the battery is charging from the AC wall charger or the solar panels, the LEDs will light up in sequence to show the charge level as shown in Fig. 1. The LED indicating the current battery level will blink rapidly while charging. When
charging is complete, all LEDs remain on for 10 min., then shut off until the | |||||
Power button is pressed. |
|
| Blinking |
| |
|
|
|
|
| |
Fig. 1 |
|
|
|
|
|
Charging |
|
|
|
|
|
In from AC/ |
|
|
|
|
|
Solar | >25% | >50% | >75% | >90% | FULL |
While the SolarBook is charging your connected device (Power button must be pressed), the LEDs will monitor the SolarBook’s battery level as shown in Fig. 2, with a single LED blinking once every 15 sec. (indicates active charging but conserves battery power).
Fig. 2
Charging Out
to Device
<25% <50% <75% <90% FULL
5