Dual Battery Charger Operation
The AvayaTM Dual Battery Charger is a
The Dual Battery Charger will only charge Nickel Metal Hydride (NiMH) Battery Packs used by the 3410 and 3606 Wireless Telephones. This charger will not charge
Power Supply
Four different models of the power supply for the Dual Battery Charger are available for regional power requirements. The correct power
supply must be ordered separately when the Charger is ordered. If any questions arise, please contact your Service Representative.
Connect the power supply to the charg- er and plug the power supply into a wall outlet. The LEDs will light only when a Wireless Telephone or battery is inserted into the slots.
Correct Placement of Battery Pack
and Wireless Telephone in the
Charging Stand Compartments
The user must end any call in progress by pressing the END key on the Wireless Telephone before placing the handset into the Charger. The call will not automatically terminate when placed in the Charger. The Battery Pack and Wireless Telephone will only fit into the charger compartments one way. The handset should be inserted into the front slot, facing forward. The Battery Pack alone should be inserted into the rear slot with the side that attaches to
The Dual Battery Charger will only successfully charge NiMH Battery Packs with a YELLOW label on the handset contact side. Older Battery Packs with a GREEN label will not charge in the Dual Battery Charger. If the indicator light is flashing with a Battery Pack or handset in the slot, check to make sure the Battery Pack has a YELLOW label.