Black & Decker BDV090 manual Maintenance, Protecting the environment

Page 7

Troubleshooting

If the appliance is not charging:

uCheck that the battery charger is properly connected to a live 230 Vac outlet (the LED will illuminate).

uCheck that the correct charging voltage has been selected for the battery being charged.

uIf the voltage of the battery to be charged has fallen below 3.75 Volts, the battery cannot be charged with this battery charger.

Maintenance

Your Black & Decker appliance has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper care and regular cleaning of your appliance.

Warning! Before performing any maintenance on corded/ cordless appliance/tool:

uDisconnect the ac plug from the ac mains socket.

uRegularly clean the appliance using a soft cloth. For stub- born marks the cloth may be made damp.

uDo not use abrasive cleaners.

uDo not immerse the appliance in water.

z

(Original instructions)

ENGLISH

Separate collection of used products and packag-

ing allows materials to be recycled and used again.

Re-use of recycled materials helps prevent

environmental pollution and reduces the demand for raw materials.

Local regulations may provide for separate collection of elec- trical products from the household, at municipal waste sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.

You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at

the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com

Replacing the fuse in the dc accessory plug (fig. C)

uDisconnect the ac plug from the ac mains socket.

uDisconnect the dc accessory plug from the appliance.

uRemove the plastic cap (7) and centre pin (8) by turning anti-clockwise.

uReplace the fuse with one of the same size and type (5 amp)

uReplace the centre pin (8) and plastic cap (7) by turning clockwise.

Mains plug replacement (U.K. & Ireland only)

If a new mains plug needs to be fitted:

uSafely dispose of the old plug.

uConnect the brown lead to the live terminal in the new plug.

uConnect the blue lead to the neutral terminal.

Warning! No connection is to be made to the earth terminal. Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 3 A.

Protecting the environment

Z Separate collection. This product must not be disposed of with normal household waste.

Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product avail- able for separate collection.

Technical data

 

 

BDV090

(type 1)

 

 

 

 

Input voltage

Vac

230

 

Rated input

W

25

 

Output voltage

Vdc

6.0 / 12.0

 

Output current

A

1.0

 

Max. battery capacity

Ah

100

 

Weight

kg

0.4

 

 

 

 

 

7

Image 7
Contents BDV090 Page Intended use Safety instructionsPreparation before charging Personal safetyCharging a battery disconnected from the circuit FeaturesConnecting the battery charger Charging a battery installed in the circuitUse Protecting the environment MaintenanceGuarantee Page BDV090 Do not forget to register your product Australia