Refer to Figure 3 for optional mounting arragements.
Figure 3. Alternate Mounting Arrangements
Grounding
The ground connector on the PS/BC provides an additional ground reference (the third prong of the AC plug is also grounded) and may be connected to “ground bus” or “ground wire” in a customer equipment room. 18 AWG or larger ground wire is recommended.
4. SPECIFICATIONS
Refer to Table 3 for specifications.
5. MAINTENANCE
The AC/DC Power Supply/Battery Charger does not require routine maintenance for design operation.
ADTRAN does not recommend that repairs be attempted in the field. Repair services are obtained by returning the defective unit to ADTRAN Customer Service.
6.WARRANTY AND CUSTOMER SERVICE
ADTRAN will replace or repair this product within 10
Table 3. | Specifications |
|
|
Electrical | |
|
|
AC Input: | 115 Volts nominal |
Range: | 88 to 132 VAC |
DC Output: | |
| 100 Watts peak |
Battery charging: | 16 hr nominal, 24 hr maximum |
Battery discharge: | Up to 8 hours |
|
|
Physical
Dimensions: 3 1/2" W x 1 3/4" H x 7" L (including mounting tabs)
Weight: 1 lb. 8 Oz.
Environmental
Operating temperature: 0º to 50º C (32º to 122º F) Storage temperature:
Relative humidity: 95%
years from the date of shipment if it does not meet its published specifications or fails while in service (see: ADTRAN Equipment Warranty, Repair, and Return Policy and Procedure, document:
Contact Customer And Product Service (CAPS) prior to returning equipment to ADTRAN.
For service, CAPS requests, or further information, contact one of the following numbers:
ADTRAN Sales
Pricing and availability (888)
ADTRAN Technical Support
Presales Applications /
Standard support hours:
Emergency support: 7 days/week, 24 hours/day
ADTRAN Repair/CAPS
Return for repair / upgrade (256)
Repair and Return Address:
ADTRAN, Inc.
Customer and Product Support (CAPS)
901 Explorer Boulevard
Huntsville, Alabama
4 | Section |