Installation in a Fireplace Opening, Operation

Installation in a Fireplace Opening

At the rear of the fire, two adjustable supports are provided for leveling the fire where the base of the fireplace opening is raised above the level of the hearth.

Adjust by removing the two screws holding each bracket in position, then refit the bracket and the two screws in the required position.

Operation

The unique flame effect may be enjoyed whether or not the heating elements are in operation.

'Please note: Used in an environment where background noise is very low, it may be possible to hear the fan which operates the flame effect. This is normal and should not be a cause for concern'.

Controls

The heater controls are located on the right hand side beneath the hinged canopy cover.

Raise the canopy cover to access the controls.

Three switches provide a choice of heat settings and an adjustable thermostat enables the room temperature to be controlled by adjusting the setting accordingly.

A switch is in the ON position when the red indicator mark on the switch is visible.

Switch 1 - Controls the electricity supply to the heater and the flame effect. Note: This switch must be in the ON position for the heater to operate.

Switch 2 - Provides 1kw heat output, with thermostat control.

Switch 3 – Provides 2kw heat output with switch 2, with thermostat control

Maintenance

WARNING – BEFORE UNDERTAKING ANY MAINTENANCE OR CLEANING REMOVE PLUG OR DISCONNECT FROM THE ELECTRICITY SUPPLY.

Lamp Replacement

There are two lamps located beneath the fuel effect. To gain access to the lamp, the grate / fuel effect secured by two screws, must be removed. (See Fig.1) Remove the coal and carefully lift the grate / fuel effect clear and set aside.

Replace the defective lamp with a 240V 60 Watt E14 SES clear candle lamp.

Replace grate/fuel effect, secure with screws.

Safety cut-out

For your safety, this appliance has been fitted with thermal cut-out. In the event that the product overheats, the cut-out switches the heat off automatically.

To bring the heat back into operation, remove the cause of the overheating, then unplug or turn off the electrical supply to the heater for up to 10 minutes. When the heater has cooled sufficiently, re-connect and switch on the heater.

Cleaning

Before commencing cleaning, unplug the heater and allow it to cool.

The surfaces of the heater should be given an occasional wipe over with a dry soft cloth.

Do not use detergents, abrasive cleaning powder or polish on the metal body of the heater.

The glass screen should be cleaned carefully with a chamois leather. DO NOT use proprietary cleaners. To remove any accumulation of dust or fluff the soft brush attachment of a vacuum cleaner should occasionally be used to clean the outlet grille of the fan heater located under the canopy.

To clean the fuel effect, remove the coal pieces and wash in warm water. The plastic tray should be wiped clean with a damp cloth. When dry replace the coal pieces and arrange for best effect.

Setting the Thermostat

Plug in and set all switches to ON. Turn the thermostat knob to MAX to warm the room rapidly. When the room temperature has reached the desired level, turn the thermostat knob back slowly until the thermostat just clicks off. The heater will then maintain the room temperature at the chosen level.

NOTE – Should your heater fail to come on when the thermostat is at a low setting, this may be due to the room temperature being higher than the thermostat setting.

After Sales Service

Your product is guaranteed for one year from the date of purchase. We undertake to exchange or repair free of charge within this period, any part (excluding lamps) found to be defective due to manufacturing fault.

Should you require after sales service, please get in touch with the supplier through whom you purchased the appliance or your nearest Service Agent.

Please do not initially return a faulty appliance or part of an appliance to us as this may result in transit damage and/or delay in providing service. Let us know your difficulty quoting the model number and series letter of the appliance. We will then take the appropriate action.

The product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility (EMC) EN55014, N60555-2 and EN60555-3 which cover the essential requirements of EEC Directives 73/23 and 9/336

Glen Dimplex UK Limited	UK customer help line (8.00AM – 6.00PM Mon-Fri; 8.30AM-1.00PM Sat)
Millbrook House
Grange Drive	Customer Services:	Tel.	0870 7270101
Hedge End		Fax.	0870 7270102
Southampton		E-mail. customer.services@glendimplex
Hampshire. SO30 2DF	Republic of Ireland	01. 8424833

LBN20 specifications

The Dimplex LBN20 is a remarkable electric heater that epitomizes modern heating technology, designed to provide efficient and reliable warmth in a variety of settings. This compact and stylish unit combines innovative features with practicality, making it a popular choice for both residential and commercial environments.

One of the standout features of the LBN20 is its exceptional energy efficiency. Utilizing advanced heating elements, the heater maximizes heat output while minimizing energy consumption. This not only helps reduce energy bills but also makes it an environmentally friendly option. The unit is rated at 2 kW, offering powerful heating capabilities for spaces up to approximately 20 square meters, ensuring optimal comfort even in larger rooms.

A key characteristic of the Dimplex LBN20 is its sleek design. With clean lines and a contemporary aesthetic, the heater blends seamlessly into any decor, whether it’s in a living room, bedroom, or office space. Its lightweight construction and compact size allow for easy portability, enabling users to move it to different locations as needed.

The LBN20 is equipped with an adjustable thermostat, allowing users to set their desired temperature for personalized comfort. The intuitive controls are user-friendly, making it easy to operate even for those who may not be familiar with electric heaters. Additionally, the heater features a fan-assisted heating system, ensuring even heat distribution and quicker warm-up times.

Safety is a paramount consideration in the design of the Dimplex LBN20. It is fitted with essential safety features, including an overheat protection mechanism that automatically shuts off the unit in case of excessive temperature rise. This feature ensures peace of mind for users, knowing that safety is prioritized.

Another noteworthy characteristic is the quiet operation of the LBN20. Unlike traditional heaters that can be noisy, this unit operates silently, making it ideal for bedrooms, nurseries, or study areas where concentration is crucial.

In summary, the Dimplex LBN20 is a versatile and efficient heating solution that embodies modern design and technology. With its energy-efficient performance, intuitive controls, stylish appearance, and robust safety features, it stands out as an excellent choice for anyone seeking effective and reliable heating. Whether for personal use or as part of a larger heating solution, the LBN20 is sure to meet and exceed expectations.