Kawasaki 840131-1HR Important Safeguards, Save These Instructions for Future Reference, Work Area

Page 15

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.

NOTE provides additional information that is useful for proper use and maintenance of this tool. If a NOTE is indicated make sure it is fully understood.

IMPORTANT SAFEGUARDS

People with electronic devices, such as pacemakers, should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker.

WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

Lead from lead-based paints.

Crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

WARNING: Handling the power cord on corded products may expose you to lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

WORK AREA

Keep your work area clean and well lit. Cluttered work benches and dark work areas may cause accidents or injury.

Do not operate power tools in explosive areas, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

Keep bystanders, children and visitors away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

Do not abuse the cord. Never use the cord to carry the tool. Keep the cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords immediately. Damaged cords may create a fire.

A battery operated tool with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery.

Use battery operated tool only with specifically designated battery pack. Use of any other batteries may create risk of fire.

3

4

Image 15
Contents 19.2V 2-SPEED BATTERY-OPERATED Drill Congratulations Table of ContentsGeneral Safety Rules for ALL Battery Operated Tools Recognize Safety SYMBOLS, Words and LabelsSave These Instructions for Future Reference Important SafeguardsElectrical Safety Personal SafetyTool USE and Care ServiceSpecific Safety Rules AND/OR Symbols Safety Rules for Cordless Drill / DriversFunctional Description SymbolsSymbol Name Explanation AccessoriesAttach Battery Pack BatteryREMOVING/ATTACHING Battery Pack Remove Battery PackImportant Information for Recharging HOT Batteries Charging Battery PackAssembly Installing Drill BIT Into Keyless ChuckHIGH/LOW Speed Gear Shifting Variable Speed Trigger SwitchTorque Settings Forward / Reverse and Trigger Lock LeverDrilling Wood Maintenance and CleaningDrilling Metal Drilling MasonryProtecting the Environment AccessoriesSpecifications Conductor Size in A.W.GCommercial or Rental Purpose Year Limited WarrantyWarranty Disclaimers 19.2V BATTERY-OPERATED Reciprocating SAW Congratulations Table of ContentsGeneral Safety RULES-FOR ALL Battery Operated Tools Recognize Safety SYMBOLS, Words and LabelsWork Area Important SafeguardsElectrical Safety Save These Instructions for Future ReferenceSafety Rules for Cordless Reciprocating Saws Personal SafetyService Specific Safety Rules AND/OR SymbolsSymbols Symbol Name ExplanationName Explanation Component Functional Description BatteryCharger Removing / Attaching Battery PackAttach Battery Pack Charging Battery PackOperating the Reciprocating SAW AssemblyVariable Speed Trigger Switch Attaching / Removing BladeGeneral Cutting Plunge CuttingMetal Cutting Protecting the Environment Maintenance and CleaningAccessories SpecificationsCommercial or Rental Purpose Year Limited WarrantyWarranty Performance Other Consumer DO-IT-YOURSELF DIY ToolsLimitations on Warranty Disclaimers ExclusionsLimitation Of Liability