Yamaha YDS-11 owner manual Connecting the dock cable

Page 6

■Connecting the dock cable

1.Connect one of the plugs of the dock cable to the dock cable terminal of this unit firmly.

3.Connect the other plug of the dock cable to the DOCK terminal of the universal dock compatible component.

Connect the plug with the side with the release button facing upward.

2.Make sure the power of the universal dock compatible component is turned off.

Note

Connecting the dock connection cable while the dock-compatible device’s power is on could result in damage.

Note

Be sure to connect the plugs of the dock cable firmly to both the dock cable terminal of this unit and the DOCK terminal of the universal dock compatible component. When the connection is loose, this unit may output some unwanted noise.

3En

Page 5 Page 7
Image 6
Page 5 Page 7
Contents YDS-11 Compliance Information Statement Precautions Read this before using this unitChecking the package contents IntroductionControls and functions Inserting an iPod dock adapterConnecting the dock cable Connecting your iPod Disconnecting the dock cable TroubleshootingSpecifications = =
Top Page Image Contents