Dimplex DF2608 manual To access the lower light bulb area

Figure 3

To access the lower light bulb area:

1.Slide fireplace out of mantel

2.Lay unit on it’s back for safe removal of front glass.

3.Remove 4 Phillips screws from the right side of trim.

4.Slide glass to right side of fireplace to remove.

5.Pull the front edge of the plastic ember bed or plastic grate up and forward until the rear tab releases from the ledge located at the bottom of the mirror.

6.Remove flicker rod by sliding flicker rod to the left away

from the flicker motor and lifting out.

7.Remove light bracket for easier access to light bulbs.

IMPORTANT

Only handle the logset by the emberbed.

NOTE

Logset fits tightly into firebox, some force may be necessary to remove.

8.Set logset in front of fireplace.

9.Unscrew bulbs counter clockwise.

10.Insert new bulbs.

11.Replace the logset by inserting the front edge of the fireplace and push down on the rear edge of the

emberbed until it snaps into place. (Figure 3)

12.Lay unit on it’s back and slide front glass back into position and attach trim.

10