Dimplex DS5804, DS5603 Glass Cleaning, Plastic Door Cleaning, Lower Light Bulb Requirements

Maintenance

handle.

2.Locate the upper bulb bracket.Bend light retainer bracket down.Locate and remove the light bulb.Insert new bulb.

3.Bend light retainer bracket back into its original position.

4.Close the door.

Lower Light Bulb Requirements

Quantity of two (2) clear chandelier or candelabra bulbs with an E-12 (small) socket base, 60 Watt rating.

Lower Bulb Replacement

1.Open door by pulling the handle.Remove the screw from the log set located in the center of the ember bed and remove the log set from the unit.

2.Locate and examine the bulbs to determine which bulb(s) required replacement.

3.Locate and remove the light bulb(s).

4.Insert new bulb(s).

5.Install the log set into the unit, pushing firmly against the glass. Replace the log set retaining screw into the

ember bed.

6. Close the door.

Glass Cleaning

The clear door is cleaned in the factory during the assembly operation. During shipment, installation, handling, etc., the clear door may collect dust particles, these can be removed by dusting lightly with a clean dry cloth.

To remove fingerprints or other marks, the clear door can be cleaned with a damp cloth. The clear door should be completely dried with a lint free cloth to prevent water spots. To prevent scratching, do not use abrasive cleaners or spray liquids on the clear door surface.

Plastic Door Cleaning

To remove fingerprints or other marks, the clear door can be cleaned with a damp cloth. The clear door should be completely dried with a lint free cloth to prevent water spots. To prevent scratching, do not use abrasive cleaners or spray liquids on the clear door surface.

11