Operation

2.Power supply connection

Check that the supply voltage details on the heater are in accordance with your electricity supply. The appliance is fitted with 2 metres of flexible cable type H05VV-F size 3 x 1.5mm for electrical connection. The cable may be used to connect the heater to the fixed wiring of the premises through a suitable connection box. The supply circuit to the heater must incorporate a double pole isolating switch having a contact separation of at least 3mm. The power supply cable should be routed from the plinth space to the connection box, ensuring that the cable is left with enough slack to allow removal of the appliance for maintenance. The cable must be protected from any sharp edges.

3.Fitting the Rear Support Bracket

The heater is supplied with a rear support bracket. Fit to the back of the appliance with the two screws supplied. Adjust the rear support bracket so that the vertical distance from the underside of the appliance to bottom of the rear support bracket equals the vertical distance from the floor in the cupboard space to the bottom of the aperture opening. The slots in the rear support bracket allow it to be adjusted to the required height.

4.Marking the Fixing Positions

Slide the heater into position in the plinth aperture. Mark the six fixing holes (two on each side and two on the top Remove the heater and drill 2mm pilot holes.

5.Mounting the Heater into the Plinth

When the cable connection has been made and the rear support bracket adjusted, slide the heater into the aperture ensuring that it is adequately supported and that the inlet grille is not obstructed. Use the six screws provided to secure the heater to the plinth. (See point 6 below for stainless steel grill fitting).

6.Stainless Steel Grille (BFH24TS model only).

The stainless steel grille is supplied (in the plastic covering) as an attachment for the front of the heater.

This should be offered up to the front of the heater before fixing the heater to the plinth. Use the six screws to secure it to the front of the heater / plinth.

1Switch on electricity supply to the heater.

2Switching the switch marked “ l “energises blower and illuminates neon indicator.

3	Select " l " and switches marked " ● " and “ “ as required:
1	+	+		=	Cooling
1	+	● +	●	=	800W heating
1	+	+		=	1600W heating
			●
1	+	● +	●	=	2400W heating
			●

Operation of Thermostat

1.The heater incorporates a variable thermostat which is controlled by a knob situated on the top right hand side of the front panel. The knob is marked *, 1 - 6, MAX, representing a temperature range of 5°C to 30°C. Lowest setting provides frost protection level.

2.Turn thermostat knob to maximum.

When the room has reached the desired comfort level turn back the knob until the thermostat just ' clicks ' off. If the knob is left in this position the room temperature will be maintained automatically at the chosen level.

Remember

If, when the heater is switched on, the room temperature is above that selected on the thermostat knob the heater will not operate. This is as it should be, and the thermostat is performing its function correctly. Should a higher temperature be required than the one selected, then it will be necessary to turn the thermostat knob to a higher setting to bring the heater into operation.

BFH24T, BFH24TB, BFH24TS, BFH24T specifications

The Dimplex BFH24 series, which includes models BFH24TB, BFH24TS, BFH24T, and BFH24T, represents an innovative approach to heating and is designed to cater to diverse needs in both domestic and commercial spaces. Known for their elegance and efficiency, these electric fires combine modern aesthetics with advanced heating technologies, creating a comfortable environment while minimizing energy costs.

One of the standout features of the Dimplex BFH24 series is the Optiflame® technology, which offers a unique visual effect that simulates a realistic flame. This patented technology utilizes a combination of LED lights and mirrors to create a flickering flame effect, ensuring that the fire looks authentic without the hassles associated with traditional fireplaces. The flame effect can be used independently of the heat source, making it perfect for year-round enjoyment.

In terms of heating performance, the BFH24TB, BFH24TS, BFH24T, and BFH24T models are equipped with powerful fan heaters that deliver quick and efficient warmth. The adjustable heat settings allow users to customize the heating level according to their specific needs, promoting comfort while also conserving energy. This means that you can easily set the desired temperature for any occasion, whether it be a cozy evening at home or a gathering with friends.

Furthermore, these models come with a sleek and modern design that can seamlessly blend into various interior styles. The options for black, silver, or a combination of finishes ensure that there is a BFH24 model to suit almost any decor. Additionally, the compact size makes it easy to install in a variety of spaces, from living rooms to bedrooms or offices.

The remote control feature found in these models enhances user convenience, allowing for effortless operation without the need to get up. With a simple press of a button, users can adjust the flame and heating settings, ensuring an optimal and personalized experience.

Safety is also a priority with the Dimplex BFH24 models. Equipped with a thermostat and overheat protection, these heaters are designed to automatically shut off if they reach unsafe temperatures, providing peace of mind for users. In summary, the Dimplex BFH24TB, BFH24TS, BFH24T, and BFH24T are excellent choices for those who want effective heating, contemporary design, and advanced technology, all wrapped up in one stylish package.