For the following device or software users

For the following device or software users

-Desktop PC (with no wireless function)

-Windows® XP

Place the LF-V30 near the wireless router.

Connect a LAN cable from the wireless router to the LAN port on the rear of the LF-V30.

Plug the LF-V30 into a wall outlet, and turn it on.  Turn the computer on. Make sure that it can

communicate with the wireless router.

 Insert the supplied CD-ROM into the computer to install the LFA-PC30.

 Start the LFA-PC30. Follow the setup wizard.

 When prompted, unplug the LAN cable and set it aside.

This cable is no longer needed.  Turn the LF-V30 off.

 Unplug the LF-V30 from the wall outlet.  Place the LF-V30 near your video device(s).

Connect your video device(s) to the LF-V30 ( pages 6 and 7.)

Plug the LF-V30 into a wall outlet, and turn it on.  Follow the setup wizard and complete the setup.

Note

If your setup is unsuccessful, please see “Troubleshooting” ( page 14) or refer to the LocationFree® Base Station Operating Instructions on the supplied CD-ROM (LFA-PC30.)