Plantronics quick start SaviW740, Multi-DeviceWirelesss Headset System, Desk Phone, Mobile

	1		Headset
Savi®W740			Customize and Charge
	1	Connect battery.

Multi-DeviceWirelesss

Headset System

Headset System

2 Desk Phone

Connect and Call

1Choose desk phone setup A, B, or C and connect cables.

A Desk phone (standard)

USE

3 Mobile

Connect and Call

1Press down and hold Bluetooth pairing button (4 seconds) on Savi base until indicator LED flashes red and blue.

4 Computer

Connect and Call

1Connect USB cable.

Guide de démarrage rapide

Guía de inicio rápido

Guía de inicio rápidoGuia de Início RápidoGuide de démarrage rapide

Guia de Início Rápido

QUICK START GUIDEquick start guide

2Choose headset wearing style and use fit kit to assemble.

Over-the-ear OR Over-the-head OR Behind-the-head

3Attach charge cradle to base.

4Plug one end of power supply into power jack on back of the base and other end into working power outlet.

BDesk phone + HL10 lifter (sold separately) See user guide at plantronics.com/accessories

USE

CDesk phone + EHS cable (sold separately)

See user guide at plantronics.com/accessories

USE

2Place Bluetooth mobile phone into search mode. Select SAVI 7xx from the list of found devices.

3If prompted by mobile phone, type 0000 as passcode.

Bluetooth indicator LED on base will turn solid blue when base has an active connection with mobile phone.

2Load Plantronics software by visiting plantronics.com/software and click on download button.

3While wearing headset, short press base computer button.

4Dial test call from computer softphone.

5End call by pressing headset call control button.

VIDEO GUIDEhttp://docs.plantronics.com/savi-700VIDEO GUIDE

http://docs.plantronics.com/savi-700

4 While wearing headset, short press base mobile button.

1Volume/mute/flash button

Increase volume		Short press up*
Decrease volume		Short press down*
Mute	Short press in
Flash	While on call, long press (1.5 seconds) up or down, will put

call on hold and answer another.

2Call control buttonAnswer/end call Short pressNOTE * If headset is worn on left, do opposite.

CAUTION For your safety, do not use headset at high volumes for extended periods of time. Doing so can cause hearing loss. Always listen at moderate levels. For more information on headsets and hearing visit plantronics.com/healthandsafety.

Please refer to the separate safety instructions for important product safety information prior to installation or use of the product.

5To charge, dock headset in base, minimum of 20 minutes.

NOTE This product has a replaceable battery. Use only the battery type supplied by Plantronics.

2While wearing headset, short press base desk phone button.

NOTE If you don't have remote call control through a lifter (HL10) or cable (EHS), manually remove desk phone handset before each call.

3If you do not hear a dial tone, open side panel and adjust middle configuration switch (A–G) until you do. Default setting A works for majority of desk phones.

4Dial test call from desk phone.

5End call by pressing headset call control button.

5	Dial test call from mobile phone.
6	End call by pressing headset call control button.

NEED MORE HELP?Technical supportplantronics.com/supportOnlineNEEDuserMOREguide HELP?http://docs.plantronics.com/savi-700Product supportplantronics.com/supportOnline user guide

has a WO2	and a WH500 headset.	http://docs.plantronics.com/savi-700
SaviW740/W740S hasbaseWO2/WO2S base and a WH500/
WH500S headset.	86111-01 (04.11)