Dometic 620525.336, 630515.336, 630515.331, 630516.336, 620525.331

620515, 620525, 620526, 630515 & 630516 Installation Instructions

c.Place divider plate up to bottom of air condi- tioner base pan firmly. The foam tape on the divider plate must seal to bottom of base pan. See FIG. 17.

CAUTION

Improper installation and sealing of divider plate will cause the compressor to quick cycle on the cold control. This may result in fuse or circuit breaker opening and/or lack of cool- ing.

FIG. 17

Note: The adhesive on the insulation is extremely sticky. Be sure the part is located where desired before pressing into place.

d.With slight pressure then push the divider plate against the double sided tape on the ceiling template.

e.Locate the 1/8” x 7” x 18” self -adhesive insula- tion supplied with the return air kit. Remove the backing paper from the insulation and carefully stick onto the ceiling template divider panel. See FIG. 18.

FIG. 18

•Excess width is intended to seal the di- vider plate to the sides of the 14-1/4" x 14- 1/4" (±1/8") opening. This is to help pre- vent cold air discharge from circulating into the air conditioner return air opening.

•If the insulation is too high, stick excess height of insulation to the air conditioner base pan. Do not cover up unit rating plate.

Installing unit with 3308120 Genesis Air Filtration System Return Air Kit. For unit with 3105007 or 3105935 Return Air Kit, see page 9.

FIG. 19 Genesis Air Filtration System

Return Air Kit

Foam

Divider

Ceiling

Template

Slider

Filter

Return Air

Cover

Grill

Handle

1. All Non-Center Duct Installations

Note: The Genesis Air Filtration System can be installed on units that use a center discharge duct through the 14-1/4" x 14-1/4" (±1/8") opening. Installing units with the center dis- charge duct go to Section 1. "Center Discharge Duct Appli- cation Installation", on page 6.

a.Check gasket alignment of the air conditioner over the roof opening and adjust if necessary. Unit may be moved from below by slightly lift- ing and moving. See FIG. 13.

•Remove return air cover, ceiling template, foam divider and air filter from the 3308120 carton.

•Locate the four (8" x 1/4-20) unit mounting bolts, junction box cover and Romex con- nector in the 3107180 bolt kit.

•Pull down the unit's electrical cord and fas- ten the junction box with screws to the framing in the front of the 14-1/4" x 14-1/4" (±1/8") opening. See FIG. 14.

b.Installing Foam Divider

•Locate the foam divider and insert it cor- ner to corner in the 14-1/4" x 14-1/4" (±1/ 8") opening with the adhesive tape up (Do not remove paper to expose adhesive). The foam divider should be level with the ceiling (±1/4"). Tear off the excess at the pre-cut perforations in divider. See FIG. 20.

620515.331, 620526.331, 620525.331, 620515.336, 630516.336 specifications

The Dometic 630515.331, 620525.336, 630515.336, 630516.336, and 620515.336 are a range of advanced appliances designed to enhance outdoor living experiences and ensure comfort in various environments. These products exemplify Dometic's commitment to innovation, quality, and user-friendly features, making them ideal for camping enthusiasts, RV owners, and anyone who enjoys spending time in outdoor settings.

One of the standout features of these models is their high-performance cooling technology. They are equipped with advanced cooling systems that efficiently maintain optimal temperatures, ensuring food and beverages remain fresh for extended periods. This is particularly beneficial during long trips where access to refrigeration can be limited.

The design of these units is another highlight. Built with robust materials, they are both durable and lightweight, making them suitable for transport and installation in various settings. The sleek design not only enhances portability but also fits seamlessly into the aesthetics of modern RVs and outdoor kitchens.

Energy efficiency is a critical aspect of the Dometic product line. These models are designed to consume minimal power, ensuring you can keep your appliances running without draining your power supply. This is especially advantageous when using solar power or when connecting to limited energy sources, making them eco-friendly options for conscious users.

User-friendliness is another key characteristic. The Dometic 630515 and 620525 series feature intuitive controls, allowing users to easily adjust settings and monitor performance. Some models come with digital displays that provide real-time information on temperature settings and energy consumption.

In terms of versatility, these appliances often include multiple configuration options, letting users tailor them to specific needs, whether it's for extended camping trips or short getaways. Some models are designed to be standalone units, while others can be integrated into existing systems for increased efficiency.

Additionally, Dometic prioritizes safety features in their designs. These units come equipped with thermal protection systems to prevent overheating, ensuring safe operation even in demanding conditions.

Overall, the Dometic 630515.331, 620525.336, 630515.336, 630516.336, and 620515.336 represent a blend of innovation, functionality, and efficiency. Their features make them indispensable for anyone looking to enhance their outdoor experience while ensuring comfort and convenience. Whether you are headed out for a weekend camping trip or embarking on a long journey in your RV, these models are engineered to meet the demands of modern adventurers.