Troubleshooting Tips

1.If the low battery alarm sounds, this means that the input voltage is below the necessary 11 V. The battery needs recharging. You should stop using the appli- ance and then recharge the battery. If this is not done, the Inverter will shut off automatically at around 10 V.

2.If you are unsure if the Inverter will have the proper amount of current to run the device, use this rough guideline: Take the power consumption of the load in watts and divide it by 12 (input voltage). The result will be the approximate number of amps needed to power your device.

Example: Load is rated at 312 watts. 312 watts / 12 V = 26 amps needed. You could use this device with the Inverter.

3.If your television will not start, it is important to keep in mind that some appli- ances (including many televisions) may require two to six times their wattage to start up.

4.If your audio system buzzes while using this Inverter, it is because some sound systems can not filter out the modified sine wave produced by the Inverter. Use a sound system that incorporates a higher quality power supply.

5.This Inverter is made to minimize the interference with TV signals. However, especially with weak TV signals, some interference may still be visible. To correct this, place the Inverter as far away as possible from the television an- tenna and it’s cables. Next, adjust the orientation of the Inverter to the antenna cables and TV power cord to minimize the interference. Also use a shielded antenna cable.

6.If the low battery alarm is on all the time, try these corrective measures: Re- charge battery if in poor condition. Next, check the battery connection. You may need to clean the connectors.

7.If you are getting a low output voltage, try reducing the load to minimize watts. You may have overloaded the Inverter. Reduce your load to 490 watts. Also, keep input voltage above 11 volts to maintain a constant flow of power.

8.If you are not getting any power output, turn the power switch Off and On again, until the green power light comes on. Your devices may draw too much power to operate them. The Inverter may be in thermal shutdown. Let it cool down and make sure there is adequate ventilation around the unit.

SKU 93096 For technical questions, please call 1-800-444-3353.

Page 8

93096 specifications

Harbor Freight Tools 93096 is a versatile tool designed for both professional tradespeople and DIY enthusiasts. Known for its robust construction and affordability, this tool delivers exceptional performance across various applications, making it a staple in any tool collection.

One of the main features of the Harbor Freight Tools 93096 is its powerful motor, which provides an impressive amount of torque, allowing users to tackle even the most challenging tasks with ease. The tool boasts a variable speed control feature, enabling users to adjust the speed according to the material and application, whether it be drilling, cutting, or sanding. This feature not only enhances precision but also extends the tool's functionality across different projects.

The 93096 also incorporates advanced safety technologies, such as a protective guard that minimizes the risk of accidental contact with moving parts. This focus on safety ensures that users can operate the tool with confidence, knowing that their well-being is taken into consideration. Furthermore, the tool is ergonomically designed, featuring a comfortable grip that reduces fatigue during extended use.

Another significant characteristic of the Harbor Freight Tools 93096 is its lightweight and compact design, making it easy to transport and store. Despite its small size, it doesn't compromise on power or durability. The materials used in its construction are high-quality, ensuring longevity and reliability even under heavy use conditions.

In terms of compatibility, the 93096 is designed to work seamlessly with a variety of attachments and accessories, expanding its utility. This adaptability allows users to switch between tasks quickly, making it ideal for both home improvement projects and professional jobs.

In summary, Harbor Freight Tools 93096 stands out as a powerful, efficient, and safe tool option for anyone looking to enhance their toolset. With its variable speed control, ergonomic design, lightweight build, and compatibility with numerous accessories, it is a valuable addition for anyone serious about their projects, whether at home or on the job site. Investing in the 93096 easily offers a balance of performance and affordability, making it a prominent choice in the competitive tool market.