11.WARNING: NiCd batteries must be disposed of properly. Do not incinerate. Batteries may burst, causing personal injury and/or property damage. Contact your local hazardous waste disposal authority for proper disposal.
12.People with pacemakers should consult their physician(s) before using this product. Elec- tromagnetic fields in close proximity to a heart pacemaker could cause interference to or failure of the pacemaker.
Unpacking
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
Assembly and operating Instructions
Note: For additional information regarding the parts listed in the following pages, refer to the As- sembly Diagram near the end of this manual.
1.
WARNING! Make sure the Power Button at the back of the Lamp Housing (5) is in its “OFF” position before making any adjustments to the Spotlight. See Figure 1.
2.Decide where you want to place the Solar Spotlight. Choose a location that receives full, direct sunlight a minimum of six hours a day. The location should not be near nighttime light sources such as porch lights or streetlights as this may trigger the lights to turn off or flicker.
3.The Solar Spotlight will need to charge for at least 6 hours before using it for the first time.
4.The light is powered by two “AA” batteries. For directions on how to replace the batteries, refer to the Replacing the Batteries section on the following page.
Figure 1
Power Button 
Lamp Housing (5)
5.Press the Power Button to the “On”
6.Pressing the Power Button will automatically turn on the Solar Spotlight during the night. After the initial charge is set, check to see that the LED Lights (2) are on by viewing the light at night or in a dark location.
SKU 95388 | For technical questions, please call | Page |