Washer (#15) with Hex Nut (#14)
Hex Nut (#18) Washer (#19)
Grip (#28)
U-Frame Channel (#10) Cross Head Bolt (#16)
Hex Bolt (#29)
Washer (#19)
Hex Nut (#18)
Step 5) Through the center hole in the extension, insert Hex Bolt (#29), slide on Washer (#19) and fasten with Nut (#18)-see Figure 2.
Step 6) Set the U-Frame Channel (#10) on top of the Right Leg Stand Frame (#27) as shown in Figure 2. Attach the U-Frame Channel (#10) to the Right Leg Stand Frame (#27) with Cross Head Bolt (#16); slide on Washer (#15) and tighten on Hex Nut (#14)-see Figure 2.
Step 7) Attach the Left Leg Frame Stand (#26) extension to the U-Frame Channel (#10). First, hold the Spacer 22 mm (#9) between the Left Leg Frame Stand (#26) and the U-Frame Channel (#10), then insert the Cross Head Bolt (#8) through Left Leg Frame Stand (#26) through Spacer (#9) and through U-Frame Channel (#10). Slide on Washer (#15) and Nut (#14)-refer to Figure 3.
| Figure 3 | |
Spacer (#9) | U-Frame Channel (#10) |
| | | |
| | | |
Washer (#15) and Nut (#14) | Cross Head Bolt (#8) |
Left Leg Frame Stand (#26) | | | | |
| |
Step 8) On the underside of the U-Frame Channel (#10), insert the Sliding Locking Block (#13) with Spring (#12) (see Figure 4) and Check Pawl (#11). On the top of the U-Frame Channel, set the Connecting Part (#7).
Figure 4
Spring (#12)
Sliding Locking
Block (#13)
