Harbor Freight Tools 91033 operating instructions INSPECTION, MAINTENANCE, and Cleaning

Page 7

6.Adjust the flame to the desired level by turning the Hand Wheel (6) counterclockwise. (See Figure A.)

7.NOTE: The lit Propane Torch should operate with a blue flame with a small yellow tip. If necessary, adjust the Hand Wheel (6) if there is sputtering or popping. (See Figure A.)

8.Pressing the Lever (19) down toward the Handle (11) will intensify the size of the flame. Releasing the Lever will bring the flame back to its previous size.

(See Figure A.) Caution: Be extra careful when using the Propane Torch with the intense flame.

9.To extinguish the flame, close the Hand Wheel (6) by turning it completely clock- wise. (See Figure A.)

10.Allow sufficient time for the Propane Torch to completely cool. Then, store the Propane Torch in a safe location and out of reach of children.

11.Disconnect the torch from the LP cylinder when not in use. Protect the hose from cuts and abrasions.

INSPECTION, MAINTENANCE, AND CLEANING

1.Before each use, inspect the general condition of the Propane Torch. Check the Propane Torch for loose connections and joints, cracked, bent, or broken parts, damaged hose, damaged propane tank, and any other condition that may affect the safe operation of the Propane Torch. If a problem occurs, have the problem corrected before further use. Do not use damaged equipment.

2.When cleaning, use only water and a mild detergent. Do not use cleaners that are combustible or corrosive.

3.When storing, always allow sufficient time for the Propane Torch to completely cool down before storing. Do not store flammable liquids or materials in the area surrounding the Propane Torch. Make sure the Propane Torch’s Hand Wheel (6) is in its “OFF” position. Only store the Propane Torch in a location that is out of reach of children.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTUER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PROD- UCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

SKU 91033

PAGE 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents For technical questions, please call Propane TorchGeneral Safety Warnings and Precautions Product SpecificationsSave this Manual Industrial applications must follow Osha requirements Maintain a firm grip on the Propane Torch while in use Specific Product Warnings and PrecautionsNever leave the Propane Torch unattended once it is lit UnpackingAssembly and Operating Instructions Product FeaturesAssembly Diagram Please Read the Following Carefully INSPECTION, MAINTENANCE, and CleaningAssembly Diagram Parts List

91033 specifications

Harbor Freight Tools 91033 is a versatile and efficient 2.5-gallon wet/dry vacuum designed for both home and professional use. Known for its portability and powerful performance, this vacuum stands out as a reliable cleaning solution for a variety of tasks, from simple spills to heavy-duty cleanups.

One of the main features of the Harbor Freight 91033 is its robust 2.5-gallon tank, which offers ample capacity for collecting debris and liquids without needing frequent emptying. The vacuum is powered by a strong 1.0 horsepower motor, delivering impressive suction power that makes it effective for picking up dirt, dust, and liquids alike. This makes it an ideal choice for workshop environments, garages, or even for cleaning vehicles.

The vacuum is designed with a lightweight and compact structure, weighing in at only a few pounds, which enhances its portability. Users can easily transport it around the house or worksite without hassle. It also comes with a built-in handle that allows for convenient carrying and moving from one area to another.

Another significant characteristic of the Harbor Freight 91033 is its versatile attachment system. The vacuum includes multiple nozzles and tools such as a crevice tool, a floor nozzle, and a foam filter, allowing users to tackle various cleaning tasks. The crevice tool is perfect for reaching tight spaces, while the floor nozzle is designed for larger surface areas.

Additionally, the 91033 features a convenient on-board storage system, keeping all attachments and accessories organized and easily accessible. This thoughtful design prevents the struggle of searching for tools when they are needed most, enhancing the user experience.

The vacuum also employs a quick-release design for easy emptying of the tank. With just a simple motion, users can detach the tank to dispose of waste efficiently, saving time and reducing mess during clean-up.

Incorporating user-friendly technologies, the Harbor Freight 91033 has a two-in-one filter design, suitable for both wet and dry applications. This feature ensures that the vacuum can handle diverse cleaning jobs, further adding to its versatility.

Overall, the Harbor Freight Tools 91033 wet/dry vacuum combines powerful suction, portability, and convenience, making it an essential tool for any DIY enthusiast or a professional looking to maintain cleanliness in various environments. Its blend of practical features ensures an effective and hassle-free cleaning experience.
Top Page Image Contents