Operation
1.Hang the magnet on a metal surface and retract the cord from the Cord Housing.
2.Plug the Cigarette Lighter Plug into the 12V outlet in the vehicle and the light will come on. When you are finished, remove the Cigarette Lighter Plug to avoid power drainage.
3. Replace the cord in the Cord Housing. | Magnet |
Cord Housing
Ring
Lens
Maintenance
1.Keep the Cigarette Lighter Plug clean and clear of any dirt or debris.
2.Changing the Bulb:
a.Remove the 4 screws that hold the Ring.
b.Remove the Ring and the Lens.
c.Remove the Bulb and replace it with a new one.
d.Replace the Ring and the Lens and the 4 screws.
3.Store in cool, dry location when not in use.
Parts List
The only replacement part available is a 10 watt bulb.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBU- TOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts.
SKU 90048 | Page 4 |