Introduction, Parts List, Charging the Battery

Introduction

Thank you for purchasing the Samson RB2030 Rechargeable Battery for Expedition EX20 and EX30 cabinets. The RB2030 incorporates four 12VDC, 3.3A Gel Cells. A fully charged RB2030 should supply power to the EX20 or EX30 for 4–5 hours.

With proper care, your RB2030 will operate trouble free for many years. Please read the instructions carefully and note that your battery has been shipped uncharged.

Parts List
RB2030 Gel Cell Battery	1
M4 x 14 Screws	2
M6 x 12 Screws	2

Charging the Battery

M4 x 14

M6 x 12

M4 x 10

Before using the RB2030, the Battery must be fully charged. After following the instructions for installation, connect the EX20 or EX30 to an outlet and turn the unit on. The battery will take 6–8 hours to fully charge. The battery level meter on the rear panel of your EX20 or EX30 will show a level only when the AC cord is disconnected.

M4 x10

M6 x 16

Thumb

Screw

figure 1

figure 2