Maintenance
1.While operating the Compressor, make sure the Filter Cover (28) (see Assembly Draw- ing on page 8), and the motor fan, are free of obstructions.
2.Periodically remove the Filter Cover (28) and make sure it is clean. It serves as a filter for purifying the air the compressor takes in.
FIGURE 2
Drain (43)
3.The Filter (42) cup will fill with moisture from air that flows through the filter. After each use, push the Drain (43) under the cup to drain off the moisture. See FIGURE 2.
Note: There are no
Service should always be done by a qualified service technician.
Note: Never use any organic solvents such as thinner, alcohol, trichloroethylene, etc. to clean the Filter Bowl. Only use dishwashing liquid.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALI- FIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER.THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts.
SKU 92403 | For technical questions, please call | Page |