Unpacking, To Check The Oil Level | Harbor Freight Tools 93271

UNPACKING

When unpacking, make sure the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

Find the bag/box that contains all hardware for mounting the parts that are shipped detached.

Assembly

Before use, thread the Muffler/Air Filter (7A) assembly into the Cylinder Case (2B).

Operation

Note: For additional references to the parts listed below, refer to the Assembly Dia- grams on pages 10, and 11.

To Check The Oil Level:

Oil Breather (14B)

Front Cover (18B)

Oil Window (20B)

FIGURE A

1.The Oil Window (20B) is used to determine if oil is needed. The oil level should always be at the maximum level (red line on the Oil Window). (See Figure A, and

Assy. Diagram B.)

2.Unscrew (do not pull) the Oil Breather (14B) out. (See Figure A.)

3.If necessary, add a premium quality, 30-weight,non-detergent oil into the Oil Fill Hole until the level of oil reaches the maximum level as indicated on the Oil Win- dow (20B). The optimal capacity of the oil reservoir is 30 ounces. Do not overfill. Then thread the Oil Breather back into the Oil Fill Hole, being careful not to strip the plastic threads.

REV 08l

SKU 93271

For technical questions, please call 1-800-444-3353.

PAGE 5