Harbor Freight Tools 94724 operating instructions Symbology Specific Safety Rules

Page 8

SYMBOLOGY

SPECIFIC SAFETY RULES

1.Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace. Always keep the work area free of obstructions, grease, oil, trash, and other debris. Do not use this product in areas near flammable chemicals, gasoline, dusts and vapors.

2.Maintain labels and nameplates on the Air Compressor. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

3.Use eye and hearing protection. Always wear ANSI approved safety impact eye goggles and hearing protectors when using this product.

4.Do not allow children to use or play with this product.

5.Store idle equipment. When not in use, tools and equipment should be stored in a dry location to inhibit rust. Always lock up tools and equipment, and keep out of reach of children.

6.Do not use this product if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgement or reflexes are impaired while taking drugs. If there is any doubt, do not attempt to use this product.

7.Make sure to fill the Air Compressor with a premium quality, 30-weight,non-detergent, compressor oil before each use. Running the Air Compressor with no oil or low oil will cause damage to the equipment and void the warranty. The optimal capacity for the oil reservoir is 1.4 ounces.

SKU 94724

For technical questions, please call 1-800-444-3353.

Page 8

Image 8
Contents AIR Compressor For technical questions, please callProduct Specifications General Safety RulesSave this Manual Work AreaElectrical Safety Personal SafetyTool USE and Care Grounded Tools Tools with Three Prong Plugs ServiceGrounding Double Insulated Tools Tools with TWO Prong Plugs Figure aSee Figure C Extension CordsSee Figure C, next Symbology Specific Safety Rules Do not allow children to use or play with this productDo not alter or remove the factory sealed Safety Valve Industrial applications must follow Osha requirementsUnpacking Operating InstructionsSee Figure E, and Figure F, next TOP ViewSee Figure F Figure FInspection and Maintenance Parts List Assembly Diagram Please Readthe Following CarefullyLimited 1 Year DAY Warranty