3.Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed.
PERSONAL SAFETY
1.Stay alert. Watch what you are doing, and use common sense when oper- ating a power tool. Do not use a power tool while tired or under the influ- ence of drugs, alcohol, or medication. A moment of inattention while operat- ing power tools may result in serious personal injury.
2.Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
3.Avoid accidental starting. Be sure the Gasoline Engine’s Power Switch is in its “OFF” position before moving the Compressor and before performing any service, maintenance, or cleaning procedures on the unit.
4.Remove adjusting keys or wrenches before turning the Compressor on. A wrench or a key that is left attached to a rotating part of the machine may result in personal injury.
5.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the power tool in unexpected situations.
6.Use safety equipment. Always wear eye protection. Always wear ANSI approved safety impact goggles when using this product. ANSI approved hearing protection must also be used.
TOOL USE AND CARE
1.Do not force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.
2.Do not use the Compressor if the Gasoline Engine’s Power Switch does not turn it on or off. Any tool that cannot be controlled with its power switch is dangerous and must be replaced.
3.Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.
4.Maintain tools with care. Properly maintained tools with a sharp cutting edge are less likely to bind and are easier to control. Do not use a damaged tool. Tag
SKU 93874 | For technical questions, please call | Page 3 |