3.Compressor Pump use and care
a.Disconnect the plug of the compressor from the power source before making any adjustments, changing accessories, or storing the compressor pump. Such preventive safety measures reduce the risk of starting the unit accidentally.
b.Store an idle compressor pump out of the reach of children and do not allow persons unfamiliar with the compressor pump or these instructions to operate it. A compressor pump is dangerous in the hands of untrained users.
c.Maintain the compressor pump. Keep the compressor pump clean for better and safer performance. Follow instructions for lubricating and changing accessories. Keep the outside surfaces dry, clean and free from oil and grease. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the compressor’s operation. If damaged, have the compressor repaired before use. Many accidents are caused by a poorly maintained compressor pump.
d.Use the compressor pump in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the compressor pump for operations different from those intended could result in a hazardous situation.
4.Service
a.Have your compressor pump serviced by a qualified repair person
using only identical replacement parts. This will ensure that the safety of the compressor pump is maintained.
Compressor Pump
Safety Warnings
1.Wear
2.Install pulley and belt safety guard before use.
3.Before first and every use, verify Pump has sufficient oil.
4.The use of accessories or attachments not recommended by the manufacturer may result in a risk of injury to persons.
5.Misalignment between Motor and Pump can damage the Belt Wheel.
Use a straight edge, such as a yardstick, to check and adjust alignment as needed.
6.Use proper size motor and motor pulley. This air compressor Pump must be installed with a 3 HP electric motor and pulley (both not supplied) which can turn the Air Compressor Belt Wheel at approximately 655 rpm.
7.Install motor, pulley belt and pulley belt cover securely. Be sure to use the proper size bolts to install your motor (not included). The belt and belt cover
(not included) must be strong enough to prevent breaking and possible injury.
8.Be sure all equipment is rated to the appropriate capacity of this pump.
Make sure that the lowest rated piece of equipment you are using can handle the maximum pressure of the Air Compressor Pump (see Specifications).
9.Do not direct the air outlet at any person or animal.
Page 4 | For technical questions, please call | SKU 67697 |