Harbor Freight Tools 93657 operating instructions SKU For technical questions, please call

Page 5

6.Make sure the Air Compressor is located on a flat, level, sturdy surface ca- pable of supporting the weight of the Compressor and any additional tools and equipment.

7.Industrial applications must follow OSHA guidelines.

8.Never stand on the Air Compressor. Serious injury could result if the Compres- sor is tipped.

9.Never leave the Air Compressor unattended when it is plugged in and run- ning. Turn off the Compressor, and unplug the unit before leaving.

10.Do not allow children and other unauthorized people to handle or play with the Air Compressor.

11.Do not move or transport the Compressor if the unit is under pressure.

12.Do not force the Compressor. This tool will do the work better and safer at the speed and capacity for which it was designed.

13.This Compressor will automatically shut off on overload or under excessive heat. Should this occur, turn the Power Switch (34) to its “OFF” position. Wait until the Compressor cools. Then, turn the Power Switch to its “ON” position to resume work.

14.Spray painting only. Never use this unit with gasoline, kerosene, or any other flammable solvent.

15.WARNING! The brass components of this product contain lead, a chemical known to the State of California to cause birth defects (or other reproductive harm). (California Health & Safety code § 25249.5, et seq.)

16.WARNING! People with pacemakers should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference to or failure of the pacemaker.

17.WARNING! The warnings and precautions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

SAVE THESE INSTRUCTIONS

SKU 93657

For technical questions, please call 1-800-444-3353.

Page 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents HP OIL-LESS Airbrush Compressor With Regulator General Safety Rules and Precautions Product SpecificationsSave this Manual Work AreaTool USE and Care Personal SafetyService Specific Safety Rules and PrecautionsSKU For technical questions, please call This Product Uses a Prong Plug GroundingGrounded Tools Tools with Three Prong Plugs This Product does not USE a 2-PRONG Plug SymbologyDouble Insulated Tools Tools with TWO Prong Plugs Operating Instructions Setup InstructionsUnpacking See Figure a INSPECTION, MAINTENANCE, and CleaningProblem Possible Causes Possible Solutions TroubleshootingPlease Read the Following Carefully Parts ListAssembly Diagram

93657 specifications

Harbor Freight Tools 93657 is a versatile and reliable product designed to meet the needs of both amateur and professional users. This tool serves as an essential addition to any workshop, providing durability, efficiency, and innovative features that enhance the user experience.

One of the standout characteristics of the Harbor Freight Tools 93657 is its robust construction. Featuring high-quality materials, it is built to withstand the rigors of daily use. The design ensures longevity and reduces the need for frequent replacements, making it a cost-effective option for users. The ergonomic design and balanced weight distribution enable comfortable handling, allowing users to work for extended periods without experiencing fatigue.

The main features of the Harbor Freight Tools 93657 include a powerful motor that delivers impressive performance across various tasks. This tool is equipped to handle a range of applications, from light-duty DIY projects to more demanding professional tasks. The efficient motor not only ensures high performance but also optimizes energy consumption, making it an eco-friendly choice.

Another notable feature is its user-friendly interface. The controls are intuitively placed, allowing for easy access and operation, even for those who are not particularly tech-savvy. Additionally, the inclusion of safety features such as overload protection and a safety switch helps safeguard users while operating the tool. These attributes are crucial in preventing accidents and enhancing overall safety on the job.

The Harbor Freight Tools 93657 also boasts advanced technology, including adjustable speed settings that provide greater control over the tool's performance. This versatility enables users to customize the tool's operation according to the specific requirements of their projects, whether fine detailing or heavy-duty work.

In terms of size and portability, the Harbor Freight Tools 93657 is designed to be compact, making it easy to store and transport. This is particularly advantageous for users who require a tool that is both effective and easy to carry between job sites.

In conclusion, the Harbor Freight Tools 93657 stands out due to its combination of robust construction, powerful performance, user-friendly features, and advanced technology. It is an invaluable tool that caters to the diverse needs of its users, making it a top choice for anyone looking to enhance their toolkit. Whether for professional use or home projects, this tool is built to deliver results that meet and exceed expectations.
Top Page Image Contents