Harbor Freight Tools 90749 operating instructions Unpacking, Figure a

Page 6

27.TO EXTEND THE LIFE OF YOUR AIR TOOLS AND EQUIPMENT, it is recommended to install an Oiler/Water Filter (not included) in series with the Air Output Line of the Air Compressor. (See Figure A.)

TO

TO

AIR

PNEUMATIC

COMPRESSOR

TOOL / EQUIPMENT

OUTLET LINE

 

FIGURE A

OILER / WATER FILTER

(NOT INCLUDED)

28.MAKE SURE TO READ AND UNDERSTAND ALL INSTRUCTIONS AND SAFETY PRECAUTIONS AS OUTLINED IN THE BRIGGS & STRATTON® GASOLINE ENGINE USER MANUAL.

29.WARNING! MAKE SURE TO TURN OFF THE GASOLINE ENGINE, RELEASE ALL PRESSURE FROM THE SYSTEM, AND ALLOW THE UNIT TO COMPLETELY COOL BEFORE PERFORMING ANY INSPECTION, MAINTENANCE, OR CLEANING PROCEDURES ON THE UNIT.

30.WARNING: This product contains or produces a chemical known to the State of California to cause cancer and birth defects (or other reproductive harm). (California Health & Safety Code § 25249.5 et seq.)

UNPACKING

When unpacking, check to make sure all the parts shown on the Parts List on page 12 and 13 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

SKU 90749

For technical questions, please call 1-800-444-3353.

Page 6

Image 6
Contents AIR Compressor Save this Manual Product SpecificationsGeneral Safety Warnings and Precautions SKU For technical questions, please callSpecific Product Warnings and Precautions Industrial Applications Must Follow Osha RequirementNever Operate the AIR Compressor Without ITS Safety Cover Attached and in Good Working ORDER. Air CompressorProlonged Exposure to Noise Levels Above 85 dBA is Hazard Unpacking Figure aAssembly Instructions Assembly Diagram on page 12Operating Instructions Not to strip the plastic threads See Figure C See Figures D, and EFigure E INSPECTION, MAINTENANCE, and Cleaning See Figures B, and EDaily Empty Condensation from the AIR Tanks Figure F Parts List Assembly DiagramParts List B Assembly Diagram B