THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner’s record below:
Model________ | Serial No._____________ | Purchase Date__________ |
SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly.
| Technical Specifications |
Tool Name: | Air Compressor, |
Item Number: | 40400 |
Motor: | 2 HP |
Power Source: | Single Phase, 110V, 60 Hz, 3360 RPM, Single Pump |
| Stage, 8 Gallon |
Max.Working Pressure: | 115 PSI; Air Flow: 6.0 SCFM at 40 PSI, 5.0 SCFM at 90 PSI, |
| 4.2 SCFM at 115 PSI |
Press Switch: | 70 PSI |
Cylinder and Head: | Cast Iron |
Piston, Connecting |
|
Rod, Crankcase: | Cast Aluminum |
Piston Diameter: | 1.886" |
Cylinder Honing: | 45 Degree Cross Hatch |
Overall Dimensions: | 26" x |
Outlet Fittings: | 1/4” x 18 NPT |
Warning: The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that COMMON SENSE AND
CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTO THIS PRODUCT, BUT MUST BE SUPPLIED BY THE OPERATOR.
Safety Warnings. Read all safety warnings before using this tool!
1.Keep work area clean. Cluttered areas invite injuries.
2.Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically powered tools in the presence of flammable gases or liquids.
3.Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords.
4.Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.
5.Do not force tool. It will do the job better and more safely at the rate for which it was intended. Do not use inappropriate attachments in an attempt to exceed the tool capacity.
6.Use the right tool for the job. Do not attempt to force a small compressor to do the work of a larger industrial compressor. There are certain applications for which this product was designed. Do not modify this compressor tool and do not use this product for a purpose for which it was not intended.
REV 10/01; 08/03
SKU 40400 | For technical questions, please call | Page 2 |