3.Once the proper fuel mix is obtained, remove the Fuel Tank Cap (16C). Fill the Fuel Tank (2C, 10C) approximately 3/4 full with the fuel mix (the Fuel Tank capacity is 0.4 gallons). Then, replace the Fuel Tank Cap. (See Figure A.)
FUEL MIX QUANTITIES
Ratio | Two Cycle Oil | Unleaded Gasoline (91 Octane) |
50:1 | 4 Fl. Oz. | 1.5 Gal. |
50:1 | 8 Fl. Oz. | 3 Gal. |
50:1 | 16 Fl. Oz. | 6 Gal. |
Table A
OPERATING INSTRUCTIONS
Note: Please read and familiarize yourself with the How To Stop The Cut Off Saw instructions on page 13 before operating.
To Start The Cut Off Saw:
1.WARNING! Wear
2.Place the Cut Off Saw on flat, level ground, so that the Saw Blade (not included) does not contact any objects or the ground. Orient the saw away from your body.
BLADE NOT | 3G | 5D | 9D | ||
INCLUDED |
| ||||
|
|
| |||
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
10D
3C
5C
7B
26D
FIGURE B
3.Move the ON/OFF Button (5D) to the on position. Place your hand on the Rear Handle (7D). Hold the Trigger Safety Lever (16D) down with your palm while squeezing the Trigger (10D) and then using your thumb, press down on the Full Throttle Lock Button (9D). (See Figure B.)
REV 08f
SKU 98089 | For technical questions, please call | PAGE 12 |