Harbor Freight Tools 93827 operating instructions 6463

Page 10

CHARGINGTHE BATTERY

Note: Always switch to a fresh battery when tool performance begins to diminish. Severe heat is most destructive to a battery; the more heat generated, the faster the battery loses power. A battery that gets too hot can be permanently damaged. Never over-discharge a battery by using the tool even after tool performance is decreasing. Never attempt to discharge a tool’s battery by continuing to pull the tool trigger. When tool performance begins to diminish, stop the tool, recharge the battery and use the fresh battery for optimal performance.

1.When a Battery (64) requires recharging, a 3 to 5 hour* charge allows the tool to operate at full power. Do not recharge the Battery longer than 5 hours*, as damage to the Battery and/or tool will occur.

2.To charge the Battery (64), plug the AC Charger Adapter’s (63) plug into the Charger (62). Insert the Charger (62) onto the top of the Battery (64) until it locks into place. Charging room temperature: 50° F - 104° F. Then, plug the AC Charger Adapter into the nearest 120 Volt, grounded, electrical outlet. (See illustration below.)

(62)

(64)(63)

3.Two Charging Indicator LEDs on the Charger (62) will illuminate to show that charging is taking place. NOTE: The AC Charger Adapter (63) will not automatically turn off when the Battery is fully charged, and the Charging Indicator LEDs will remain on until the AC Charger Adapter is disconnected from the electrical outlet. Recharging the Battery more than 5 hours* can cause damage to the battery cells.

4.While charging, the Battery (64), AC Charger Adapter (63), and/or Charger (62) may become warm to the touch. This is normal, and does not indicate a problem.

5.Once the Battery (64) is fully charged, disconnect the AC Charger Adapter (63) from the electrical outlet. Then, disconnect the Charger from the Battery.

*The Battery (64) require an initial charge time of 8 hours. Do not recharge the Battery more than 5 hours after this initial charging.

SKU 93827

For technical questions, please call 1-800-444-3353.

Page 10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents For technical questions and replacement parts, please call 18V Circular SAWContents SaveThis Manual General Safety RulesDescription Work AreaElectrical Safety Personal SafetyTool Use and Care Grounding ServiceGroundedToolsTools WithThree Prong Plugs See Figure C, next Double InsulatedToolsTools WithTwo Prong PlugsExtension Cords See Figure C SKU For technical questions, please callSymbology See Figure CSpecific Safety Rules 6463 To Adjust the Fence OperationTo Adjust the Angle of Cut Get in Position for and Perform the Cut INSPECTION, MAINTENANCE, and Cleaning Please Read the Following CarefullyParts List and Diagram Circular Saw Part Description

93827 specifications

Harbor Freight Tools has long been known for offering a wide range of quality tools at competitive prices, and the model 93827 is no exception. This specific model, often considered a staple for both amateur and professional users, showcases a blend of functionality, durability, and affordability.

The primary feature of the Harbor Freight Tools 93827 is its impressive lifting capacity. This hydraulic floor jack is designed to handle up to 2 tons, making it an ideal choice for lifting cars, trucks, and other large vehicles with ease and safety. Its heavy-duty steel construction ensures longevity and resilience, allowing users to rely on it for various lifting tasks.

One of the standout technologies integrated into the Harbor Freight 93827 is its dual piston pump, which provides quicker lifting capability compared to standard jacks. This feature allows users to raise their vehicle with fewer pumps, maximizing efficiency during tire changes or maintenance work. The pump action is smooth and consistent, designed to prevent sudden drops and ensure safety.

Another key characteristic of the 93827 is its low-profile design. With a minimum height that allows it to slide under most vehicles, this jack is particularly advantageous for sports cars and lower-profile vehicles. Once the jack is in position, it can be raised to a maximum height that accommodates effective access to the undercarriage for repairs and inspections.

In addition to its functional attributes, the 93827 also incorporates a rubberized saddle pad to protect the vehicle's frame during lifting. This thoughtful design consideration shows that Harbor Freight values not only performance but also the integrity of the vehicles being serviced.

Portability is another significant feature of this hydraulic jack. With built-in wheels and a compact footprint, it can be easily maneuvered in tight spaces and stored away when not in use. Whether in a workshop, garage, or out on the job site, the Harbor Freight 93827 is designed for convenience.

Overall, the Harbor Freight Tools 93827 hydraulic floor jack stands out as an outstanding choice for those seeking reliable lifting equipment. Its robust construction, quick lift technology, and user-friendly features render it a popular option for both DIY enthusiasts and professionals alike, proving that quality does not necessarily have to come at a high price.
Top Page Image Contents