To Make Straight Cuts, See Figure B | Harbor Freight Tools 03733

To Make Straight Cuts:

1.Remove the Screw (part #16). Then, remove the Table (part #1) from the Tile Saw unit. (See Figure C.)

2.Fill the Body (part #19) with water. CAUTION: Make sure the water level is high enough to cover the lower edge of the Tile Saw Blade (part #36), but

not above the maximum water level as indicated by the arrow. (See Figure D.)

FILL WITH WATER AS INDICATED BY ARROW

DO NOT OVERFILL

FIGURE D

3.Reinstall the Table (part #1), and secure it in place with the Screw (part #16).

(See Figure C.)

4.Adjust the Parallel Rip Fence (part #7) to the width of cut desired. To do so, lift up on each Lever (part #9) located at each end of the Parallel Rip Fence. Slide the Parallel Rip Fence to the right or left until the desired width of cut is obtained. Then, lock the Parallel Rip Fence in place by pressing down on each Lever.

(See Figure B.)

5.Plug the Power Cord (part #11) into a grounded, 120 Volt electrical outlet.

6.Turn the Power Switch (part #4) to its “ON” position, and allow the Tile Saw Blade (part #36) to spin up to full speed. NOTE: Make sure the Tile Saw Blade is picking up water from the Body (part #19) of the unit. If not, turn the Power Switch to its “OFF” position, and unplug the Power Cord from its electrical outlet. Then, check the water level. (See Figures B, C, and D.)

SKU 03733

PAGE 9

03733 specifications

The Harbor Freight Tools 03733, also known as the 12" Miter Saw, is a versatile and reliable tool that caters to both DIY enthusiasts and professional woodworkers. Known for its affordability and ease of use, this miter saw has gained popularity in various woodworking and construction projects.

One of the standout features of the 03733 is its powerful 15-amp motor, which delivers a robust performance. This motor allows the saw to handle a variety of materials with ease, including hardwoods, softwoods, and even composite materials. The saw provides a no-load speed of up to 4,500 RPM, offering faster cutting and more efficient performance.

The precision cutting capability of the 03733 is another significant attribute. It is equipped with a laser guide system that enhances accuracy while making crosscuts and miter cuts. This feature allows users to see exactly where the blade will cut, minimizing errors and improving overall precision. Additionally, the saw features an adjustable miter table, which can be set from 0 to 45 degrees, providing the flexibility to make a wide range of angled cuts.

Portability is also a key characteristic of the Harbor Freight 03733. It is designed to be lightweight and easily transportable, making it an ideal choice for job sites and home projects alike. The built-in carrying handle enhances its portability even further, allowing for easy movement without compromising on performance.

Another notable feature is its safety mechanisms. The 03733 comes with a blade guard that automatically retracts when the saw is in use, offering an extra layer of protection for the operator. Additionally, the switch is designed to be easily accessible yet provides a secure lock-off function, preventing accidental starts.

Durability is a hallmark of this miter saw. Constructed with high-quality materials, the 03733 is built to withstand the rigors of frequent use. Its sturdy base ensures stability during cutting operations, reducing vibrations and promoting a more controlled cutting experience.

In summary, the Harbor Freight Tools 03733 12" Miter Saw is a powerful and user-friendly tool designed to deliver precision and portability. With its robust motor, laser guide system, adjustable miter table, and safety features, it's a valuable addition to any workshop or job site. Its combination of affordability, reliability, and performance makes it a compelling choice for anyone looking to enhance their woodworking capabilities.