Sigma KS-1018 manual Operation

Kachinko System

right (as you look from the front):

Operation

Locate the unit where the front light is clearly visible by the camera.

•Make any necessary connections from the TONE OUT to the camera, if you are not us- ing the camera’s microphone.

•If you are recording the signal with the camera microphone, set the POWER switch to ON (BUZZ), otherwise set it to ON.

•Set the camera iris setting to manual. An automatic setting can overcompensate for the KS -1018’s lighting, and make it impos- sible to see the “clapperboard” effect on the target monitor.

•Make the image of the front light as large as possible by putting the camera close in front of the KS -1018. The focus of the cam- era is not important in this case.

Set the MODE switch to AUTO. The main light lights, and the beep sounds (or the signal is output through the jacks). The three red LEDs

7