Harbor Freight Tools 66783 Grounding Pin Metal Screw Cover of Grounded Outlet Box

Page 3

4.GROUNDING AND AC POWER CORD CONNECTION INSTRUCTIONS - Charger should be grounded to reduce risk of electric shock. Charger is equipped with an electric cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER - Never alter AC cord or plug provided - if it will not fit outlet, have proper outlet installed by a qualified electrician. Improper connection can result in a risk of an electric shock.

This battery charger is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated in sketch A in Below Figure. A temporary adapter, which looks like the adapter illustrated in sketch B, may be used to connect this plug to a two-pole receptacle as shown in sketch B if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet can be installed by a qualified electrician.

Grounding

Pin

Metal Screw

Cover of Grounded

Outlet Box

(A)

(B)

DANGER - Before using adapter as illustrated, be certain that center screw of outlet plate is grounded. The green-colored rigid ear or lug extending from adapter must be connected to a properly grounded outlet- make certain it is grounded. If necessary, replace original outlet cover plate screw with a longer screw that will secure adapter ear or lug to outlet cover plate and make ground connection to grounded outlet.

5.Do not operate this charger with a damaged cord or plug – replace the cord or plug immediately.

6.Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman.

7.Do not disassemble charger; take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.

8.To reduce risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning.

9.WARNING - RISK OF EXPLOSIVE GASES.

a. Working in the vicinity of a lead-acid battery is dangerous. Batteries generate

explosive gases during normal battery operation. For this reason, it is of utmost

REV 09b

SKU 66783

For technical questions, please call 1-800-444-3353.

Page 3

Image 3
Contents Distributed exclusively by Harbor Freight Tools For technical questions or replacement parts, please callSpecifications Important SafeguardsFor technical questions, please call Grounding Pin Metal Screw Cover of Grounded Outlet Box Personal Precautions Charger Location Specific Safety Rules for the Battery Charger Risk of Explosion UnpackingAbout Charging Batteries SetupV / 10 a mode Preparing the BatteryEngine Starting Ammeter ReadingsSKU For technical questions, please call MaintenanceParts List and Assembly Diagram Part Description ’tyLimited 90 DAY Warranty