Energizer PP355 Handling Procedures, ‐‐ Recommended Operating and Storage Conditions, ‐‐ Safety

Page 17

P a g e 17

Section 4: Handling Procedures

4.1 ‐‐ Recommended Operating and Storage Conditions

For optimum performance and capacity retention, Zinc Air Prismatic batteries should be used in a temperature range of ‐10⁰C to 55⁰C and in a relative humidity range of 25% to 80%. Zinc Air batteries should be stored between 10°C and 30°C and at 40% to 70% relative humidity. Batteries should be stored with the tab in place to prevent performance degradation due to environmental exposure. As with any chemical system, high temperature storage will result in increased loss of capacity.

4.2 ‐‐ Polarity Markings

The adhesive tab of the battery covers the positive can contact and is marked with a positive polarity (+) mark. In addition, a negative polarity (‐) marking is etched on the metal cup to help users correctly insert the battery into the device battery compartment.

4.3 ‐‐ Safety

Energizer Zinc Air Prismatic batteries undergo safety and abuse testing according to alkaline and zinc air industry standards. Some of the tests performed include multiple temperature cycling, deep discharge, direct short, thermal abuse, abusive charge. Safety test performance is consistent with that of standard alkaline and indicates no safety concerns. Under standard conditions, minimal hydrogen gas can be generated as in other alkaline cells and cell thickness may increase slightly. Under abusive conditions, leakage is more likely to occur with increased cell thickness.

In situations where the battery is operating or stored in temperatures and humidity outside the recommended ranges in Section 4.1, or under abusive conditions, the battery may produce a small amount of white precipitate (salting) on the crimp of the battery. Energizer recommends that the battery be disposed of if and when salting is observed. Exposed skin or clothing should be cleansed with cool soapy water.

Because of their size, Zinc Air Prismatic batteries pose a swallowing / choking hazard. If batteries are swallowed, immediately contact the National Capital Poison Center collect at 202‐625‐3333 for medical advice.

4.4 ‐‐ Battery Disposal

Energizer does not add mercury or cadmium to Zinc Air Prismatic batteries therefore they are exempt from any special collection and disposal regulations after discharge.

ENERGIZER BATTERY MANUFACTURING

VERSION 1.2

Image 17
Contents Energizer Zinc Air Prismatic Handbook Energizer Zinc Air Prismatic Handbook ‐‐ Construction Battery Overview‐‐ Zinc Air Chemistry Cross Section View of Zinc Air Prismatic Battery ‐‐ Features of Zinc Air PrismaticAaaa Alkaline Lithium Ion PP425 PP355 PP255 ‐‐ Zinc Air Prismatic Battery Sizes‐‐ Performance at Standard Conditions PP355 Performance Characteristics‐‐ Performance at Other Environmental Conditions Comparison of Performance under Continuous Constant PowerHumid Typical Arid Cold ‐‐ Pulse CapabilityPulse Capability of PP355 Batteries ‐‐ Service Maintenance‐‐ Activation Time and Air Requirements ‐‐ Air Management Application and Design ConsiderationsDischarge Rate ‐‐ Elements of Air ManagementAir Management Design Concept ‐‐ Battery CompartmentBattery Orientation and Device Contacts ‐‐ Fuel Gauging ‐‐ Multi‐Battery Applications‐‐ Recommended Cutoff Voltage ‐‐ Safety Handling Procedures‐‐ Battery Disposal ‐‐ Recommended Operating and Storage Conditions

PP355 specifications

The Energizer PP355 is a versatile and robust battery designed to meet the power demands of various devices, particularly in the domain of consumer electronics. This battery is part of Energizer's commitment to providing reliable and high-performance power solutions for everyday needs. The PP355 designation is designed to function efficiently in a myriad of applications, from toys and remote controls to more specialized electronic gadgets.

One of the main features of the Energizer PP355 is its alkaline chemistry, which offers a reliable energy source with a long shelf life. These batteries can hold their charge for extended periods, making them ideal for devices that may not be used regularly. Users can trust that the energy stored within the PP355 will be ready whenever it is needed. The chemistry also ensures a steady power output, helping devices function optimally without the risk of sudden power drain.

Another noteworthy characteristic of the PP355 is its superior leak resistance technology, ensuring that it can withstand various environmental conditions and prolonged usage. This innovation helps in preventing leakage, which can damage devices and compromise performance. The design focuses on safety and durability, making the PP355 not only a reliable energy source but also a safe choice for users.

In terms of size, the PP355 is designed to comply with standard dimensions, allowing it to fit seamlessly into devices specified for similar battery types. Its compatibility with a wide range of products enhances its appeal, as consumers can easily replace old batteries without worrying about finding an unusual size or model.

Moreover, the PP355 is geared towards sustainability, with Energizer emphasizing eco-friendly practices in its production processes. The brand is committed to reducing its environmental footprint, making the PP355 not just a power source, but a responsible choice for consumers who are increasingly aware of environmental issues.

In conclusion, the Energizer PP355 merges advanced technology with practical features, creating a reliable battery option for a variety of daily applications. With its impressive performance, safety characteristics, and focus on sustainability, the PP355 represents Energizer’s dedication to providing quality power solutions in today's fast-paced digital world.