B.Australia/New Zealand
1.Locate the black button / latch at the base of the charger where the North American / Austrailian Plug is embedded.
2.Release the North American / Austrailian plug by pressing down on the button / latch. Continue to push the North American Plug upward until it is in a 90 degree position (Figure A).
3.Twist the North American / Austrailian Plug on the left side clockwise direction until it is in a 45 degree angled position. Twist the North American Plug on the right side in a counter clockwise direction until it is in a 45 degree angled position (Figure B).
Figure B
4.You may now place your
C.United Kingdom
1.Locate the Euro Plug on the same side as the North American Plug. Grasp the end of the Euro Plug and pull it up until it is in a 90 degree angled position.
CAUTION: For safe and proper use make sure that the North American Plug locks into a closed position (Figure C).
2.Pull out the UK Key from its position on the front of the charger.
3.First insert the UK Key into the ground socket of the wall outlet. This action will open the two top power sockets. Now insert the Euro Plug into the power sockets on the wall outlet.
UK Key
Figure C
4.You may now place your
NOTE: When you have finished charging your battery, replace the UK Key to its proper position on the front of the charger.
D.Europe / Asia
1.Locate the Euro Plug on the same side as the North American / Austrailian Plug. Grasp the end of the Euro Plug and pull it up until it is in a 90 degree angled position (Figure D).
CAUTION: For safe and proper use make sure that the North American Plug locks into a closed position
Figure D
2.You may now place your Lithuim-Ion battery in the charger. Insert the plug into a wall outlet and begin charging your battery.
ONE YEAR WARRANTY:
Mizco International, Inc. warrants this product to be free from defects in materials and workmanship to the original purchaser for a period of One Year from the original purchase date. Mizco’s responsibility with regard to this limited warranty shall be limited solely to the repair or replacement, at it’s own option, of any product which fails during normal use. This warranty does not extend to damage or failure, which results from misuse, neglect, accident, alteration, abuse, improper installation, or improper maintenance. To exercise this limited warranty, send your name and address with proof of purchase and the UPC from the package. Product sent for warranty must be mailed to the address below, freight prepaid. Include $5.00 for return shipping and handling.
DigiPower
140 58th Street
Building B, Unit 4G
Brooklyn, NY 11220
MADE IN CHINA