Problems and Solutions

Problem	Possible Cause	Solution
No status light	No power	Make sure power flow to the wall outlet
	to charger	is “ON”.
	Loose connections	Check connections of all plugs. Make
		sure the charger connector is tightly
		plugged into the battery and the power
		cord connector is tightly plugged into
		both the charger and the wall outlet.
	Bad charger	There is no sure way to tell if your
		charger is working unless you have
		a volt meter. If you suspect there is
		a problem with your charger, contact
		Power Wheels® Consumer Relations.
	Wrong battery	This charger is intended for use only
		with a Power Wheels® 12-volt lead
		acid battery.
Flashing red	Loose connections	Check connection of all plugs. Make sure
status light		the charger connector is tightly plugged
		into the battery and the power cord
		connector is tightly plugged into both the
		charger and the wall outlet.
	Undercharged	Battery needs a 100% (solid green)
	battery	charge every other use.
	Battery dead	Replace battery with a new,
		Power Wheels® 12-volt lead acid battery.
Solid red	Undercharged	Charge battery 100% (solid green) or
status light	battery	Ready for Use (flashing green).