Fujitsu FJBC-GP manual Battery Capacity Charging Time, Using the Battery Charger

Page 4

The following items can affect the battery charger’s performance:

After a battery has been charging for a period (as noted below), the battery charger will stop charging (regardless of the charge level) and the Charge Indicator LED will turn green. This is a safety feature to prevent damage to the battery.

Battery Capacity

Charging Time

 

 

Less than 2500 mAh

5 hours

 

 

2500 mAh to 4100 mAh

8 hours

 

 

Over 4100 mAh

12 hours

 

 

When a battery has been left unused for a long time, it will take longer to charge.

When the ambient temperature is low, it will take longer to charge a battery.

If the temperature of a battery connected to the charger is extremely high or low, the battery charger will standby for charg- ing until the battery returns to normal temperature. This is a safety feature designed to prevent damage to the battery.

USING THE BATTERY CHARGER

To charge a battery, follow these steps:

1.Connect the battery charger to the AC adapter.

2.Plug the AC adapter into an AC outlet. (Figure 2)

3.The Power Indicator LED will light up and the Charging Indi- cator LED(s) will flash orange once.

4.When the Charging Indicator LED(s) turns off, align the plastic key pin of the battery connector with the corresponding guide in the battery socket. Be very careful to align the battery and charger properly. (Figure 3)

4

Image 4
Contents Power Indicator LED Battery Charger ComponentsBattery Connector Charge Indicator LEDsAC Adapter Connector Battery Charger Operation Charge Indicator Charging ConditionBattery Capacity Charging Time Using the Battery ChargerConnecting the AC Adapter Care and Maintenance Connecting the batterySpecifications Specification DetailsFujitsu Computer Systems Contact Information Technical SupportDeclaration of Conformity FCC Notices DOC Industry Canada NoticesPage Page B5FY-8881-01EN-00