FMW51BC1
External Battery Charger
User’s Guide
PenCentra 130 / PenCentra 200
Stylistic LT / Stylistic LT C-500
The FMW51BC1 external battery charger allows you to charge two battery packs simultaneously.
Caution
UL Notice: FMW51BC1 External Battery Charger
PenCentra Users: Use this battery charger with the FMW51BP1 battery pack only.
Stylistic LT Users: Use this battery charger with the
Stylistic LT
Using the Battery Charger
To charge your battery pack(s) in the external battery charger:
1.Connect an FPC DC power source such as AC Adapter FMWAC4, FMWAC14, or Auto Adapter FMWCB2 to the DC input on the battery charger. The Power status indicator on the charger turns on indicating that power is supplied to the charger.
2.Insert the battery pack into one of the slots in the battery charger as shown in the following figure until the battery pack is firmly seated in the charger.
3.There are two status indicators on the battery charger, one for each slot. The status indicators change colors to represent different battery conditions, as noted in Table 1.
Table 1: Status Indicator States
Indicator | Condition | Status | ||
|
|
| ||
Power | OFF | AC Adapter not connected | ||
|
|
| ||
| Green/ON | AC Adapter connected | ||
|
|
| ||
Battery 1/ | OFF | No battery installed | ||
Battery 2 |
|
|
| |
Green/ON | Charge complete | |||
| ||||
|
|
|
| |
| Amber | ON | Charging | |
|
|
|
| |
|
| Blink 1 | Standby (Waiting to charge) | |
| Red | ON 2 | Battery pack alarm | |
|
| Blink 1,2 | Battery charger alarm | |
1Blinks at rate of one second on, one second off.
2If the battery charger indicates a fault condition with the battery pack, remove the battery pack, disconnect power to the charger, and contact your local help desk or your reseller for further assistance.
Slide
Connector Pins
Battery Slot 2 
Battery Slot 1
DC Input
Status
Indicators
Power
1
Battery 1
2
Battery 2
Rechargeable
Battery Pack
Stylistic LT, Stylistic LT
8/00 |