Preparation
Battery supply
∫About batteries that you can use with this unit
The battery that can be used with this unit is
It has been found that counterfeit battery packs which look very similar to the genuine product are made available to purchase in some markets. Some of these battery packs are not adequately protected with internal protection to meet the requirements of appropriate safety standards. There is a possibility that these battery packs may lead to fire or explosion. Please be advised that we are not liable for any accident or failure occurring as a result of use of a counterfeit battery pack. To ensure that safe products are used we would recommend that a genuine Panasonic battery pack is used.
Inserting/removing the battery
| |
| |
| |
1Open the card/battery door and insert the battery in the direction shown in the figure.
≥Push the centre of the battery in the direction of the # until it “clicks” and locks.
2Close the card/battery door.
∫Removing the battery
Move the battery release lever in the direction indicated by the arrow and remove the battery when unlocked.
≥ Turn off the unit and make sure the LCD monitor is turned off. Then remove the battery while supporting the unit to prevent it dropping.
10VQT3A10