or ABOVE 40°C (104°F). This is very important in order to maintain optimal condition of the battery pack.
17)Do not incinerate the battery pack. It can explode in a fire.
18)Avoid dangerous environment. Do not use charger in damp or wet locations.
19)The charger is designed to operate on standard household electrical power only. Do not attempt to use it on any other voltage!
20)Do not abuse cord. Never carry charger by cord or yank it to disconnect from outlet. Keep cord away from heat, oil and sharp edges.
21)Charge the battery pack in a well ven- tilated place, do not cover the charger and battery pack with a cloth, etc., while charging.
22)Use of an attachment not recommend-
ed may result in a risk of fire, electric shock, or injury to persons.
23)Do not short the battery pack. A battery short can cause a large current flow, over heating and create the risk of fire or personal injury.
24)NOTE: If the supply cord of this ap- pliance is damaged, it must only be replaced by a repair shop authorized by the manufacturer, because special pur- pose tools are required.
25)TO REDUCE THE RISK OF ELEC- TRIC SHOCK, THIS APPLIANCE HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER).
This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified elec- trician to install the proper outlet. Do not change the plug in any way.
.FUNCTIONAL DESCRIPTION
(A) | (G) |
|
(B)
(C)
(D)
(E) | (F) | ||
|
| ||
|
|
|
|
(A) | 6.35 mm (1/4") hex quick connect chuck | (E) | Battery pack (EY9200) |
|
|
|
|
(B) | Forward / Reverse lever | (F) | Battery pack release button |
|
|
|
|
(C) | Variable speed control trigger | (G) | Battery charger (EY0110) |
|
|
|
|
(D) | Bit holder |
|
|
|
|
|
|
- 5 -