Porter-Cable 7406 instruction manual Specific Safety Rules and Symbols, Jackson, TN

902388 - 02-21-02.qxd 2/28/02 8:31 AM Page 4

SPECIFIC SAFETY RULES AND SYMBOLS

1.Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will also make exposed metal parts of the tool “live” and shock the operator.

2.Always use proper guard with grinding wheel. A guard protects operator from broken wheel fragments.

3.Accessories must be rated for at least the speed recommended on the tool warning label. Wheels and other accessories running over rated speed can fly apart and cause injury.

4.Always use an approved guard with those accessories that require a guard.

5.Use proper safety equipment. Wear safety goggles to protect your eyes and wear a protective mask to minimize breathing in the fine dust created while sanding.

6.Sanding of lead-based paint is not recommended. Lead-based paint should only be removed by a professional.

7.Do not install woodcarving blade on this grinder.

8.Some wood contains preservatives which can be toxic. Take extra care to prevent inhalation and skin contact when working with these materials. Request, and follow, any safety information available from your material supplier.

9. WARNING: There are certain applications for which this tool was designed. Porter-Cable strongly recommends that this tool NOT be modified and/or used for any application other than for which it was designed. If you have any questions relative to its application DO NOT use the tool until you have written Porter-Cable and we have advised you.

	Technical Service Manager
	Porter-Cable Corporation
	4825 Highway 45 North
SYMBOL	Jackson, TN 38305
	DEFINITION
V	volts
A	amperes
Hz	hertz
W	watts
kW	kilowatts
µF	microfarads
l	liters
kg	kilograms
N/cm2	newtons per square centimeter
Pa	pascals
h	hours
min	minutes
s	seconds
..........................	alternating current
3	three-phase alternating current
3N	three-phase alternating current with neutral
..........................	direct current
	4