SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
IMPORTANT SAFETY INSTRUCTIONS
WARNING
Read and understand all warnings and operating instruc- tions before using any tools or equipment. When using tools or equipment, basic safety precautions should always be followed to reduce the risk of personal injury. Improper operation, maintenance, or modification of tools or equipment could result in serious injury and property damage. This product is NOT to be modified and/or used for any application other than for which it was designed.
SAFETY GUIDELINES – DEFINITIONS
It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this infor- mation.
DANGER Indicates an imminently dangerous situ- ation which, if not avoided, will result in death or serious injury.
WARNING Indicates a dangerous situation which, if not avoided could result in death or serious injury.
CAUTION Indicates a potentially dangerous situa- tion which, if not avoided, may result in personal injury.
GENERAL SAFETY RULES
WARNING Read and understand all instructions. Failure to follow all instructions listed below, may result in serious personal injury.
SAVE THESE INSTRUCTIONS
Work area safety
A. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
B. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
C. Keep children and bystanders away while operating a power tool. Distractions may cause you to lose con- trol.
Electrical safety
A. Power tools must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools.
B. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges, and refrigerators.
C. Do not expose power tools to rain or wet conditions. D. Do not abuse the cord. Never use the cord for carry- ing, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Personal safety
A. Stay alert, watch what you are doing and use com- mon sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication.
B. Use safety equipment. Always wear eye protection. Safety equipment such as a dusk mask,
C. Avoid accidental Starting. Ensure the switch is in the
D. Do not overreach. Keep proper footing and balance at all times.
E. Dress properly. Do not wear loose clothing or jew- elry. Keep your hair, clothing, and gloves away from moving parts.
Power Tool use and care
A. Do not use the power tool if the switch does not turn it on and off.
B. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools.
C. Store idle power tools out of reach of children and do
not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
D. Maintain the power tools. Check for damages and any condition that may affect the power tools opera- tion.
CARTON CONTENTS
This tool comes with an instruction manual that includes a parts list.
PSD101 – 5" Backer Pads (3) PSD103 – Adjustable dust skirt (1)
BACKER PAD INSTALLATION
Install the three, PSD101 – Backer Pads on the lower shafts of the Spindle Assemblies. Line up the screw on the back of the PSD101 – Backer Pads with the thread- ed holes in the lower shafts and turn
BACKER PAD SAVER INSTALLATION
Attach the three, PSD102 – Backer Pad Savers on the, PSD102 – Backer Pads by aligning the pads together
2