Porter-Cable 447k Operation, Installing and Care of Dust BAG, Vacuum Cleaner Adapter, RIP Guide

Page 12

900003 - 04-09-02.qxd 4/18/02 7:42 AM Page 12

INSTALLING AND CARE OF DUST BAG

A dust bag is available as an accessory. Install dust bag as follows:

1.CAUTION: DISCONNECT TOOL FROM POWER SOURCE.

2.Swing open exhaust cover (A) Fig. 12, and clean out any sawdust that may have accumulated.

3.Insert dust bag tube in exhaust opening and push in until seated.

4.To remove, grasp dust bag tube where it enters exhaust opening and pull out.

5.Unzip bag and shake out sawdust. Occasionally turn bag inside out and brush out thoroughly.

CAUTION: To avoid personal injury from flying sawdust, the exhaust cover should be kept closed at all times the dust bag is not assembled. NEVER insert foreign objects into exhaust opening.

VACUUM CLEANER ADAPTER

An accessory vacuum hose assembly is available for connecting the exhaust nozzle directly to a shop type vacuum cleaner.

RIP GUIDE

A rip guide (A), Fig. 13, is available as an accessory. Install rip guide as follows:

1.CAUTION: DISCONNECT TOOL FROM POWER SOURCE.

2.Insert rip guide through slot in right side of saw base. Slide the guide in until it extends through the slot in left side of base.

3.Position the compression spring to the thumb screw (supplied with the rip guide), and thread into the hole in the saw base. DO NOT TIGHTEN.

4.Adjust the rip guide for the desired width of cut and tighten the thumb screw.

A

Fig. 13

CAUTION: To avoid personal injury and damage to workpiece, the rip guide must always extend through both slots in base.

OPERATION

HOW TO USE THE SAW

For maximum protection of the operator, effective control of this powerful saw requires two-handed operation.

WARNING: It is important to support the work properly and to hold the saw firmly to prevent loss of control which could cause personal injury. Fig. 14 illustrates proper hand support of the saw.

Clamp work on a rigid support such as a bench or saw horses. See Fig. 14. Mark the line of cut on the work. Be sure cut-off line is beyond end of support to the right only enough to allow proper operation of the telescoping guard. Place front edge of saw squarely on work before starting motor. Sight the

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Double Insulated General Safety Rules Electrical SafetyPersonal Safety Work AreaService Tools USE and CareSpecific Safety Rules and Symbols for Circular Saws Kickback Replacement Parts MotorExtension Cord Selection Assembly Installing the BladeFunctional Description ForewordTo Adjust Depth of CUT for Normal Cutting Telescoping GuardTo Adjust for Bevel Cuts 45 Bevel Positive StopsBack Cuts To Adjust 90 Positive Stop To Adjust 45 Bevel Positive StopLINE-OF-CUT Indicator Installing Sawdust Exhaust NozzleBlade Wrench Storage Installing and Care of Dust BAG Vacuum Cleaner AdapterHOW to USE the SAW OperationCROSS-CUTTING RippingPocket Cuts Plunge Cutting Bevel CuttingMaintenance Keep Tool CleanFailure to Start LubricationAccessories Service and RepairsCanadian PORTER-CABLE Delta Service Centers

447k, 347k specifications

The Porter-Cable 347K and 447K are two innovative pneumatic nailers designed to meet the needs of both professionals and DIY enthusiasts. Known for their robust performance and reliable construction, these nailers are ideal for a variety of applications, including framing, roofing, and finishing work.

One of the main features of the Porter-Cable 347K is its capability to handle a wide range of fasteners. This model supports 3 to 3-1/4 inch framing nails, making it versatile for various construction tasks. The tool is equipped with a tool-free depth adjustment, allowing users to easily set the driving depth of the nails, ensuring a precision finish. This feature is especially helpful for applications where nail placement is critical, such as in cabinetry or trim work.

On the other hand, the 447K model is primarily geared towards fastening applications that require a lighter touch. This nailer is capable of firing 2 to 4-inch angled finish nails, suitable for tasks like crown molding and furniture assembly. The quick-release nose design of the 447K ensures that jammed nails can be cleared quickly, minimizing downtime on the job site.

In terms of technology, both models incorporate an integrated air filter to keep the internal mechanisms clean and functioning smoothly. This feature is vital for extending the lifespan of the tool and maintaining consistent performance. Furthermore, the clear side window on both nailers allows users to easily monitor nail levels, reducing the likelihood of running out of fasteners during crucial moments.

Both the 347K and 447K models boast lightweight designs, making them easy to maneuver for extended periods. This ergonomic advantage enhances user comfort, making them suitable for prolonged use on large projects. Additionally, the rubber grip and trigger ensure that users have a secure hold on the nailers, offering superior control and precision during operation.

Both Porter-Cable nailers come equipped with a durable carrying case for easy transport and storage, ensuring that the tools remain organized and protected when not in use.

Overall, the Porter-Cable 347K and 447K nailers stand out for their reliability, performance, and user-friendly features. Whether you're a professional contractor or a weekend warrior, these tools will add efficiency and precision to your construction projects, making them a valuable addition to any toolbox.
Top Page Image Contents