Personal Safety, Tools USE and Care | Porter-Cable 7537, 7536

3.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

4.Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.

5.When operating a power tool outside, use an outdoor extension cord marked “W-A” or “W”. These cords are rated for outdoor use and reduce the risk of electric shock.

PERSONAL SAFETY

1.Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

2.Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

3.Avoid accidental starting. Be sure switch is OFF before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch ON invites accidents.

4.Remove adjusting keys or wrenches before turning the tool ON. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

5.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.

6.Use safety equipment. Always wear eye protection. Dust mask, non- skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

TOOLS USE AND CARE

1.Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

2.Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

3.Do not use tool if switch does not turn it ON or OFF. Any tool that cannot be controlled with the switch is dangerous and must be repaired.

4.Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.

5.Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

6.Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools, with sharp cutting edges are less likely to bind and are easier to control.

7.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

8.Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.

7537, 7536 specifications

The Porter-Cable 7536 and 7537 are two well-regarded models in the realm of woodworking and construction tools, particularly known for their versatility and reliability in a professional environment. Both models serve a distinct purpose in the tooling landscape, with the Porter-Cable 7536 functioning primarily as a heavy-duty 6-inch laminate trimmer and the 7537 primarily as a more powerful model that caters to a wider range of woodworking tasks.

One of the standout features of the Porter-Cable 7536 is its robust motor. With a 7.0 Amp motor, it delivers ample power for efficiently trimming laminate edges and performing other trim work. This tool provides a variable speed control, enabling users to adjust the RPM according to the specific material or task at hand, ultimately allowing for precision work without damaging the material. The unit is designed with a low profile and lightweight setup, which ensures enhanced maneuverability, making it easier to work in tight spaces.

The 7536 also boasts a durable base plate that enhances stability during operation, a crucial aspect when tackling delicate trimming tasks. Additionally, its clear sub-base provides visibility, allowing the operator to see the cutting line easily for accuracy. Furthermore, the model is compatible with a range of standard laminate bits, enabling craftsmen to execute a variety of applications seamlessly.

On the other hand, the Porter-Cable 7537 is equipped with even more power, featuring an 8.5 Amp motor that caters to a broader spectrum of woodworking needs. This model also includes precision depth adjustments for flawless cuts up to 1-3/4 inches deep in a single pass. The 7537 stands out for its easily adjustable depth control, which locks securely to provide repeatable accuracy, ideal for professional woodworkers who require consistency in their tasks.

Both models incorporate innovative technologies, such as the soft-start feature, which minimizes the initial torque when starting, ensuring the user has a controlled start. Reliability and ease of use are evident in their ergonomic design, reducing user fatigue during prolonged periods of work.

In summary, the Porter-Cable 7536 and 7537 are exemplary tools known for their robust performance, precise adjustments, and innovative features. Whether you're a professional contractor or a DIY enthusiast, these models promise to deliver exceptional results for a wide range of woodworking applications. They stand as a testament to Porter-Cable's commitment to producing high-quality tools that meet the demands of users across various skill levels.